1001 |
Bit Switch |
|||
001 |
Bit Switch 1 |
0 |
1 |
|
bit 0 |
DFU |
- |
- |
|
bit 1 |
DFU |
- |
- |
|
bit 2 |
DFU |
- |
- |
|
bit 3 |
No I/O Timeout |
0: Disable |
1: Enable |
|
Enable: The MFP I/O Timeout setting will have no effect. I/O Timeouts will never occur. |
||||
bit 4 |
SD Card Save Mode |
0: Disable |
1: Enable |
|
Enable: Print jobs will be saved to an SD Card in the GW SD slot ( "Card Save Function" in the System Maintenance Reference of the Field Service Manual). |
||||
bit 5 |
DFU |
- |
- |
|
bit 6 |
DFU |
- |
- |
|
bit 7 |
[RPCS,PCL]: Printable area frame border |
0: Disable |
1: Enable |
|
Enable: The machine prints all RPCS and PCL jobs with a border on the edges of the printable area. |
1001 |
Bit Switch |
|||
002 |
Bit Switch 2 |
0 |
1 |
|
bit 0 |
DFU |
- |
- |
|
bit 1 |
DFU |
- |
- |
|
bit 2 |
Applying a collation Type |
Shift Collate |
Normal Collate |
|
A collation type (shift or normal) will be applied to all jobs that do not already have a ‘Collate Type’ configured.
|
||||
bit 3 |
[PCL5e/c,PS]: PDL Auto Switching |
0: Enable |
1: Disable |
|
Disable: The MFPs ability to change the PDL processor mid-job. Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL switching is disabled, these jobs will not be printed properly. |
||||
bit 4 |
DFU |
- |
- |
|
bit 5 |
DFU |
- |
- |
|
bit 6 |
DFU |
- |
- |
|
bit 7 |
DFU |
- |
- |
1001 |
Bit Switch |
|||
003 |
Bit Switch 3 |
0 |
1 |
|
bit 0 |
DFU |
- |
- |
|
bit 1 |
DFU |
- |
- |
|
bit 2 |
[PCL5e/c]: Legacy HP compatibility |
0: Disable |
1: Enable |
|
Enable: Uses the same left margin as older HP models such as HP4000/HP8000. In other words, the left margin defined in the job (usually "<ESC>*r0A") will be changed to "<ESC>*r1A" |
||||
bit 3 |
DFU |
- |
- |
|
bit 4 |
DFU |
- |
- |
|
bit 5 |
DFU |
- |
- |
|
bit 6 |
DFU |
- |
- |
|
bit 7 |
DFU |
- |
- |
1001 |
Bit Switch |
||
004 |
Bit Switch 4 DFU |
- |
- |
1001 |
Bit Switch |
|||
005 |
Bit Switch 5 |
0 |
1 |
|
bit 0 |
Show "Collate Type", "Staple Type" and "Punch Type" buttons on the operation panel. |
Disable |
Enable |
|
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type from the operation panel. The available types will depend on the device and configured options. After enabling the function, the settings will appear under: "User Tools > Printer Features > System" |
||||
bit 1 |
DFU |
- |
- |
|
bit 2 |
DFU |
- |
- |
|
bit 3 |
[PS] PS Criteria |
Pattern3 |
Pattern1 |
|
Change the number of PS criterion used by the PS interpreter to determine whether a job is PS data or not. Pattern3: includes most PS commands. Pattern1: A small number of PS tags and headers |
||||
bit 4 |
Increase max number of the stored jobs to 1000 jobs. |
Disable (100) |
Enable (1000) |
|
Enable: Changes the maximum number of jobs that can be stored on the HDD via Job Type settings to 1000. The default is 100. |
||||
bit 5 |
Face-up output |
Disable |
Enable |
|
Enable: All print jobs will be output face-up in the destination tray. |
||||
bit 6 |
DFU |
- |
- |
|
bit 7 |
DFU |
- |
- |
1001 |
Bit Switch |
||
006 |
Bit Switch 6 DFU |
- |
- |
1001 |
Bit Switch |
||
007 |
Bit Switch 7 DFU |
- |
- |
1001 |
Bit Switch |
|||
008 |
Bit Switch 8 |
0 |
1 |
|
bit 0 |
DFU |
- |
- |
|
bit 1 |
DFU |
- |
- |
|
bit 2 |
DFU |
- |
- |
|
bit 3 |
[PCL,PS]: Allow BW jobs to print without requiring User Code |
Disable |
Enable |
|
Enable: BW jobs submitted without a user code will be printed even if usercode authentication is enabled.
|
||||
bit 4 |
DFU |
- |
- |
|
bit 5 |
DFU |
- |
- |
|
bit 6 |
[PS]: Orientation Auto Detect Function |
Enable |
Disable |
|
Disable: Automatically chooses page orientations of PostScript jobs (Landscape or Portrait) based on the content printed on the page. |
||||
bit 7 |
[PDF]: Orientation Auto Detect Function |
Enable |
Disable |
|
Automatically chooses page orientations of PDF jobs (Landscape or Portrait) based on the content printed on the page. |
1003 |
[Clear Setting] |
1003 1 |
Initialize Printer System |
Initializes settings in the "System" menu of the user mode. |
|
1003 3 |
Delete Program |
1004 |
[Print Summary] |
1004 1 |
Print Summary |
Prints the service summary sheet (a summary of all the controller settings). |
1005 |
[Display Version] |
1005 1 |
Disp. Version |
Displays the version of the controller firmware. |
1006 |
[Sample/Locked Print] |
*CTL |
0: Linked, 1: On |
1006 1 |
Enables and disables the document server. When you select "0," the document server is enabled or disabled in accordance with Copy Service Mode SP5-967. When you select "1," the document server is enabled regardless of Copy Service Mode SP5-967. |
1101 |
[Data Recall] |
||
Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous setting, or c) the current setting. |
|||
1101 1 |
Factory |
*CTL |
|
1101 2 |
Previous |
||
1101 3 |
Current |
||
1101 4 |
ACC |
1102 |
[Resolution Setting] |
Selects the printing mode (resolution) for the printer gamma adjustment. |
|
1102 1 |
2400x600 Photo, 1800x600 Photo, 600 x 600 Photo, 2400x600 Text, 1800x600, Text, 600x600 Text |
1103 |
[Test Page] |
Prints the test page to check the color balance before and after the gamma adjustment. |
|
1103 1 |
Color Gray Scale |
1103 2 |
Color Pattern |
1104 |
[Gamma Adjustment] |
||
Adjusts the printer gamma for the mode selected in the "Mode Selection" menu. |
|||
1104 1 |
Black: Highlight |
*CTL |
[0 to 30 / 15 / 1/step ] |
1104 2 |
Black: Shadow |
||
1104 3 |
Black: Middle |
||
1104 4 |
Black: IDmax |
||
1104 21 |
Cyan: Highlight |
||
1104 22 |
Cyan: Shadow |
||
1104 23 |
Cyan: Middle |
||
1104 24 |
Cyan: IDmax |
||
1104 41 |
Magenta: Highlight |
||
1104 42 |
Magenta: Shadow |
||
1104 43 |
Magenta: Middle |
||
1104 44 |
Magenta: IDmax |
||
1104 61 |
Yellow: Highlight |
||
1104 62 |
Yellow: Shadow |
||
1104 63 |
Yellow: Middle |
||
1104 64 |
Yellow: IDmax |
1105 |
[Save Tone Control Value] |
Stores the print gamma adjusted with the "Gamma Adj." menu item as the current setting. Before the machine stores the new "current setting", it moves the data currently stored as the "current setting" to the "previous setting" memory storage location. |
|
1105 1 |
Save Tone Control Value |
1106 |
[Toner Limit] |
||
Adjusts the maximum toner amount for image development. |
|||
1106 1 |
Toner Limit Value |
*CTL |
[100 to 400 / 260 / 1 %/step ] |