Drive Layout

1. Scanner motor:

Drives the scanner unit.

2. Toner supply clutch-K and -CMY:

Turns on/off the drive power to the toner supply unit (K and -CMY).

3.ITB (Image Transfer Belt) contact motor:

Moves the ITB into contact and away from the color PCUs.

4. Toner transport motor:

Drives the toner attraction pumps and the toner collection coils from the PCUs, from the transfer belt unit, and inside the toner collection bottle. Also rotates the toner bottles.

5. Development clutch (K, Y, M, C):

Turns on/off the drive power to the development unit (K, Y, M, C).

6. Drum/Development drive motor (K, Y, M, C)

Drives the color drum unit and development unit (K, Y, M, C).

7. Paper feed clutch

Switches the drive power between tray 1 and tray 2.

8. Paper feed motor:

Drives the paper feed mechanisms (tray 1/tray 2).

9. By-pass feed clutch:

Turns on/off the drive power to the by-pass pick-up, feed and separation rollers.

10. Registration motor:

Drives the registration roller.

11. By-pass/duplex feed motor:

Drives the by-pass pick-up, feed and separation roller, and duplex transport rollers.

12. Paper transfer contact motor:

Moves the paper transfer roller in contact with the image transfer belt.

13. ITB drive motor:

Drives the image transfer belt unit.

14. Duplex inverter motor

Drives the duplex inverter rollers and duplex transport rollers.

15. Fusing/paper exit motor:

Drives the fusing unit and paper exit section.