Skip header
 

Top Page > Main Chapters > Installation > Copier Installation > Installation Procedure > Settings Relevant to the Service Contract

Settings Relevant to the Service Contract

Change the necessary settings for the following SP modes if the customer has made a service contract.

Note

  • You must select one of the counter methods (developments/prints) in accordance with the contract ( SP5-045-001).

  • The SP operation sound can be turned on or off. For details, see "SP Operation Sound On/Off Setting" below.

Item

SP No.

Function

Default

Counting method

SP5-045-001

Specifies if the counting method used in meter charge mode is based on developments or prints.

“0”: Developments

A3/11" x 17" double counting

SP5-104-001

Specifies whether the counter is doubled for A3/11" x 17" paper. When you have to change this setting, contact your supervisor.

“No”: Single counting

Service Tel. No. Setting

SP5-812-001 through 004

5812-002 programs the service station fax number. The number is printed on the counter list when the meter charge mode is selected. This lets the user fax the counter data to the service station.