Transporting the Machine
Main Frame
Do SP 4806-001 to move the scanner carriage from the home position. This prevents dust from falling into the machine during transportation.
Remove the toner cartridges. This prevents toner flow into the toner supply tube, which is caused by vibration during transport. This can also cause the tube to be clogged with toner.
Make sure there is no paper left in the paper trays. Then fix down the bottom plates with a sheet of paper and tape.
Empty the toner collection bottle. Then attach securing tape to stop the toner bottle from coming out.
Do one of the following:
Attach shipping tape to the covers and doors.
Shrink-wrap the machine tightly.
After you move the machine, make sure you do the "Auto Color Registration" as follows. This optimizes color registration.
1. Do the "Forced Line Position Adj. Mode c" (SP2-111-3).
2. Then do the "Forced Line Position Adj. Mode a" (SP2-111-1).
To check if SP 2-111-1 was successful, watch the screen during the process. A message is displayed at the end. Also, you can check the result with SP 2-194-10 to -12.Make sure that the side fences in the trays are correctly positioned to prevent color registration errors.
