Skip header
 

Top Page > Main Chapters > Installation > Internal Shift Tray SH3040 (D388) > Installation Procedure

Installation Procedure

CAUTION

  • Unplug the copier power cord before starting the following procedure.

b791i102

  1. Remove all tapes.

  2. Remove the standard tray [A].

  3. Remove the inner cover [B] (_screw.png x 1).

    d388i102.png

  4. Install the small paper guides [C].

    d388i103a.png

  5. Attach the connector cover [D] to the shift tray unit [E].

  6. Install the shift tray unit [E] to the machine.

  7. Push down the left edge [F] of the shift tray.

  8. Turn on the main power switch of the machine.

  9. Check the shift tray unit operation.