Skip header
 

Top Page > Main Chapters > Installation > Anti-Condensation Heater (Scanner) > Installation Procedure

Installation Procedure

b230i207a.png

  1. Rear cover (_point.png Rear Cover in the "Replacement and Adjustment" section)

  2. Open the ARDF or platen cover.

  3. Glass cover [A] (_screw.png x 4)

  4. ARDF exposure glass [B]

  5. Rear scale [C] (_screw.png x 3)

  6. Exposure glass with left scale [D]

    b230i203

  7. Move the scanner carriage to the right side by rotating the scanner motor [E].

  8. Install the heater [F] in the scanner unit (_screw.png x 1, hook)

  9. Put the connector [G] through the cutout.

  10. Connect it to the connector [H] (blue and red cords) in the frame of the machine.

  11. Reassemble the machine.