Skip header
 

Top Page > Main Chapters > Installation > Controller Options > IEEE 1284 Interface Board Type A > Installation Procedure

Installation Procedure

CAUTION

  • Unplug the main machine power cord before you do the following procedure.

You can only install one of the following network interfaces at a time: (IEEE 802.11 a/g, (Wireless LAN), IEEE1284, Bluetooth).

d088i404.jpg

  1. Remove the slot A cover [A] (_screw.png x 2).

  2. Install the interface board [B] (Knob-screw x 2) into the slot A.

  3. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the end of this section).