Skip header
 

Top Page > Main Chapters > Installation > Controller Options > Bluetooth Interface Unit Type 3245

Bluetooth Interface Unit Type 3245

CAUTION

  • Unplug the main machine power cord before you do the following procedure.

You can only install one of the following network interfaces at a time: (IEEE 802.11 a/g (Wireless LAN), IEEE1284, Bluetooth).

d027i405.jpg

  1. Remove the slot cover [A] (_screw.png x 2).

  2. Install the Bluetooth board [B] (Knob-screw x 2) into the slot A.

  3. Insert the Bluetooth card into the Bluetooth card adaptor.

  4. Install the Bluetooth card adaptor on the Bluetooth board.

  5. Attach the antenna cap to the Bluetooth board.

  6. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the end of this section).