Installation Procedure

1. Remove the slot cover [A] for SD cards ( x 1).

2. Remove the VM card [B] from SD slot 2.

3. Turn the SD-card label face [C] of the browser unit to the front of the machine. Then push it slowly into SD slot 2 until you hear a click.

4. Plug in and turn on the main power switch.

5. Push the "User Tools" key.

   • If an administrator setting is registered for the machine, step 5 and 6 are required. Otherwise, skip to the step 7

6. Push the "Login/ Logout" key.

7. Login with the administrator user name and password.

8. Touch "Extended Feature Settings" twice on the LCD.

9. Touch "Install" on the LCD.

10. Touch "SD Card".

11. Touch the "Browser" line.

12. Under "Install to" touch "Machine HDD" and touch "Next".

13. When you see "Ready to Install", check the information on the screen to confirm your previous selection.

14. Touch "OK". You will see "Installing the extended feature... Please wait.", and then "Completed".

15. Touch "Exit" to go back to the setting screen.

16. Touch "Change Allocation".

17. Touch the "Browser" line.

18. Press one of the hard keys, which you want to use for the Browser Unit. In default, this function is assigned to the "Other Functions" key (bottom key of function keys).

19. Touch "OK".

20. Touch "Exit" twice to go back to the copy screen.

21. Turn off the main power switch.

22. Install the key for "Browser Unit" to the place, where you want.

23. Remove the SD card of the browser unit from SD slot 2.

24. Reinstall the VM card in SD slot 2.

25. Attach the slot cover [A] ( x 1).

26. Keep the SD card in the place ( SD Card Appli Move) after you install the application program from the card to HDD. This is because: The SD card can be the only proof that the user is licensed to use the application program. You may need to check the SD card and its data to solve a problem in the future.