Skip header
 

Top Page > Main Chapters > Replacement and Adjustment > Drive Unit > Development Clutches for M and C

Development Clutches for M and C

  1. Rear cover (_point.png Rear Cover)

  2. PSU bracket (_point.png PSU)

  3. Open the controller box. (_point.png Controller Box).

  4. Drum/development motors for M and C (_point.png Drum/Development Motors for M, C, and Y)

  5. Disconnect the connector for each development clutch (_connector.png x 1).

    d027r121b.png

  6. Turn the development clutch unit [A] counter-clockwise and then pull it out (_screw.png x 1).

  7. Development clutches for M and C [B] (_clip.png x 1)