Skip header
 

Duplex Unit

  1. Rear cover (_point.png Rear Cover)

  2. Right rear cover (_point.png Right Rear Cover)

  3. Right door cover (_point.png Paper Transfer Unit)

    d088r554.jpg

  4. Close the right door [A].

  5. Remove the spring [B].

  6. Open the right door [A].

    d088r555.jpg

  7. Release the front link [A] (_clip.png x 1).

  8. Keep the right door fully open.

    d088r711.jpg

  9. Hold the right door, and then release the wire [A] (_clip.png x 1).

    CAUTION

    • Keep holding the right door before removing the right door completely. Otherwise, the right door can fall down and injure you.

  10. Press the projection [B] to pull the right door shaft into the unit, and then remove the duplex unit [C] (_screw.png x 1, _clamp.png x 1, _connector.png x 4, ground cable x 1).