When removing the controller box

1. Rear cover ( Rear Cover)

2. Scanner rear cover ( Exposure Lamp)

3. Right rear cover ( Right Rear Cover)

4. Controller box right cover ( Controller Box Right Cover)

   

5. Remove the controller box stay [A] ( x 4).

   

6. Move the IOB bracket [A] aside ( x 4, x All).

   

7. Disconnect the scanner interface cable [A] (ground cable)

8. Release all clamps on the controller box frame.

9. Disconnect all connectors on the BICU [B] board.

10. Disconnect the connector [C] at the outer controller box and at the inner controller box.

    

11. Lift up the controller box [A], and then remove it.