Top Page > Main Chapters > System Maintenance > Main SP Tables-7 > SP7-XXX (Data Log)

SP7-XXX (Data Log)

7401	[Total SC Counter]
	Displays the number of SC codes detected.
001	SC Counter	*CTL	[0 to 9999 / 0 / 1/step ]

7403	[SC History]
7403	Logs the SC codes detected. The 10 most recently detected SC Codes are not displayed on the screen, but can be seen on the SMC (logging) outputs.
001	Latest	*CTL	-
002	Latest 1
003	Latest 2
004	Latest 3
005	Latest 4
006	Latest 5
007	Latest 6
008	Latest 7
009	Latest 8
010	Latest 9

7502	[Total Paper Jam Counter]
	Displays the total number of jams detected.
001	Total Jam	* CTL	[0 to 9999 / 0 / 1 sheet/step ]

7503	[Total Original Jam Counter]
	Displays the total number of original jams.
001	Original Jam counter	*CTL	[0 to 9999 / 0 / 1 original/step ]

7504	[Paper Jam Location] ON: On check, OFF: Off Check
7504	Displays the number of jams according to the location where jams were detected. NOTE: The LCT is counted as the 3rd feed station.
001	At Power On	*CTL	For details, ( Jam Detection )
003	Tray 1: ON	*CTL
004	Tray 2: ON	*CTL
005	Tray 3: ON	*CTL
006	Tray 4: ON	*CTL
007	LCT : ON	*CTL
008	Bypass: ON	*CTL
009	Duplex: ON	*CTL
011	Vertical Transport 1: ON	*CTL
012	Vertical Transport 2: ON	*CTL
013	Bank: Transport Sn1	*CTL	For details, ( Jam Detection )
014	Bank: Transport Sn2	*CTL
017	Registration: ON	*CTL
018	Fusing Entrance: ON	*CTL
019	Fusing Exit: ON	*CTL
020	Paper Exit: ON	*CTL
021	Bridge Exit: ON	*CTL
022	Bridge Transport: ON	*CTL
024	Junction Gate Sensor : On	*CTL
025	Duplex Exit: ON	*CTL	For details, ( Jam Detection )
026	Duplex Entrance: ON (Out)	*CTL
027	Duplex Entrance: ON (Out)	*CTL
051	Vertical Transport 1: Off	*CTL
052	Vertical Transport 2: Off	*CTL
053	Bank Transport 1: Off	*CTL
054	Bank Transport 2: Off	*CTL
057	Registration Sensor: Off	*CTL
058	LCT Feed Sensor : Off
060	Paper Exit Off	*CTL
061	Bridge Exit: Off	*CTL
062	Bridge Transport: Off	*CTL
064	Junction Gate Sensor : Off	*CTL	For details, ( Jam Detection )
065	Duplex Exit: Off	*CTL
066	Duplex Entrance: Off (In)	*CTL
067	Duplex entrance : Off (Out)	*CTL
100	Finisher Entrance: KIN	*CTL
101	Finisher Shift Tray Exit: KIN	*CTL
102	Finisher Staple: KIN	*CTL
103	Finisher Exit: KIN	*CTL
105	Finisher Tray Lift Motor: KIN	*CTL
106	Finisher Jogger Motor: KIN	*CTL
107	Finisher Shift Motor: KIN	*CTL
108	Finisher Staple Motor: KIN	*CTL
109	Finisher Exit Motor: KIN	*CTL
191	Finisher Entrance: EUP	*CTL	For details, ( Jam Detection )
192	Finisher Proof Exit: EUP	*CTL
193	Finisher Shift Tray Exit: EUP	*CTL
194	Finisher Stapler Exit: EUP	*CTL
195	Finisher Exit: EUP	*CTL
198	Finisher Folder: EUP	*CTL
199	Finisher Tray Motor: EUP	*CTL
200	Finisher Jogger Motor: EUP	*CTL
201	Finisher Shift Motor: EUP	*CTL
202	Finisher Staple Moving Motor: EUP	*CTL
203	Finisher Staple Motor: EUP	*CTL
204	Finisher Folder Motor: EUP	*CTL
206	Finisher Punch Motor: EUP	*CTL

7505	[Original Jam Detection]
7505	Displays the total number of original jams by location.
001	At Power On	*CTL	-
003	Skew Correction: On
004	Registration Sensor: On
005	Original Exit Sensor: On
053	Skew Correction: Off
054	Registration Sensor: Off
055	Original Exit Sensor: Off

7506	[Jam Count by Paper Size]
7506	Displays the number of jams according to the paper size.
005	A4 LEF	*CTL	[0 to 9999 / 0 / 1 sheet/step ]
006	A5 LEF	*CTL
014	B5 LEF	*CTL
038	LT LEF	*CTL
044	HLT LEF	*CTL
132	A3 SEF	*CTL	[0 to 9999 / 0 / 1 sheet/step ]
133	A4 SEF	*CTL
134	A5 SEF	*CTL
141	B4 SEF	*CTL
142	B5 SEF	*CTL
160	DLT SEF	*CTL
164	LG SEF	*CTL
166	LT SEF	*CTL
172	HLT SEF	*CTL
255	Others	*CTL	[0 to 9999 / 0 / 1 sheet/step ]

7507	[Plotter Jam History]
7507	Displays the 10 most recently detected paper jams.
001	Latest	*CTL	-
002	Latest 1
003	Latest 2
004	Latest 3
005	Latest 4
006	Latest 5
007	Latest 6
008	Latest 7
009	Latest 8
010	Latest 9

7508	[Original Jam History]
7508	Displays the 10 most recently detected original jams.
001	Latest	*CTL	-
002	Latest-1
003	Latest-2
004	Latest-3
005	Latest-4
006	Latest-5
007	Latest-6
008	Latest-7
009	Latest-8
010	Latest-9

7624	Part Replacement Operation ON/OFF
7624	Selects the PM maintenance for each part.
001	K Drum Unit	[0 or 1 / 1 -] 0: Not PM maintenance 1: PM maintenance
002	M Drum Unit
003	C Drum Unit
004	Y Drum Unit
005	K Dev Unit
006	M Dev Unit
007	C Dev Unit
008	Y Dev Unit
009	K Developer
010	M Developer
011	C Developer
012	Y Developer
013	ITB Unit	[0 or 1 / 1 -] 0: Not PM maintenance 1: PM maintenance
014	Belt Cleaning Unit
015	Fusing Unit
016	PTR Unit
017	Waste Toner Bottle
018	Fusing Roller
019	Pressure Roller

7801	[ROM No/ Firmware Version]
255	Engine	*CTL	Displays all versions and ROM numbers in the machine.

7803	[PM Counter Display] (Page, Unit, [Color])
	Displays the number of sheets printed for each current maintenance unit. PM counters click up based on the number of A4 (LT) LEF size sheets printed. Therefore, the A3 (DLT) Double Count is activated. The Double Count cannot be deactivated. When a unit is replaced, the machine automatically detects that the new unit is installed. Then, the current PM counter value is automatically moved to the PM Counter - Previous (SP7-906-1 to 10) and is reset to “0”. The total number of sheets printed with the last unit replaced can be checked with SP7-906-1 to 10. NOTE: The LCT is counted as the 3rd feed station.
001	Paper	*CTL			-
002	Page: K Drum Unit	*ENG			-
003	Page: M Drum Unit
004	Page: C Drum Unit
005	Page: Y Drum Unit
006	Page: K Dev Unit
007	Page: M Dev Unit
008	Page: C Dev Unit
009	Page: Y Dev Unit
010	Page: K Developer	*ENG			-
011	Page: M Developer
012	Page: C Developer
013	Page: Y Developer
014	Page: ITB Unit
015	Page: Belt Cleaning Unit
016	Page: Fusing Unit
017	Page: PTR Unit
018	Page: Toner Collection Bottle
019	Page: Fusing Roller (Heating Roller)
020	Page: Pressure Roller
	Displays the number of revolutions of motors or clutches for each current maintenance unit. [ 0 to 9999999 / 0 / 1 revolution/step ] When a unit is replaced, the machine automatically detects that the new unit is installed. Then, the current PM counter value is automatically moved to the PM Counter - Previous (SP7-906-11 to 20) and is reset to “0”. The total number of revolutions made with the last unit replaced can be checked with SP7-906-11 to 20.
031	Rotation: K Drum Unit		*ENG			[0 to 999999999 / - / 1 mm/step ]
032	Rotation: M Drum Unit
033	Rotation: C Drum Unit
034	Rotation: Y Drum Unit
035	Rotation: K Dev Unit
036	Rotation: M Dev Unit
037	Rotation: C Dev Unit
038	Rotation: Y Dev Unit
039	Rotation: K Developer
040	Rotation: M Developer
041	Rotation: C Developer
042	Rotation: Y Developer
043	Rotation: ITB Unit		*ENG			[0 to 999999999 / - / 1 mm/step ]
044	Rotation: Cleaning Unit		*ENG
045	Rotation: Fusing Unit		*ENG
046	Rotation: PTR Unit		*ENG
047	Measurement: Toner Collection bottle		*ENG
048	Rotation: Fusing Roller (Heating Roller)		*ENG
049	Rotation: Pressure Roller		*ENG
	Displays the value given by the following formula: (Current revolution Target revolution) 100. This shows how much of the unit’s expected lifetime has been used up. The Rotation% counter is based on rotations, not prints. If the number of rotations reaches the limit, the machine enters the end condition for that unit. If the print count lifetime is reached first, the machine also enters the end condition, even though the R% counter is still less than 100%.
061	Rotation (%): K Drum Unit			*ENG			[0 to 255 / - / 1 %/step]
062	Rotation (%): M Drum Unit
063	Rotation (%): C Drum Unit
064	Rotation (%): Y Drum Unit
065	Rotation (%): K Dev Unit
066	Rotation (%): M Dev Unit
067	Rotation (%): C Dev Unit
068	Rotation (%): Y Dev Unit
069	Rotation (%): K Developer
070	Rotation (%): M Developer
071	Rotation (%): C Developer
072	Rotation (%): Y Developer
073	Rotation (%): ITB Unit			*ENG			[0 to 255 / - / 1 %/step]
074	Rotation (%): Cleaning Unit
075	Rotation (%): Fusing Unit
076	Rotation (%): PTR Unit
077	Measurement (%): Toner Collection bottle
078	Rotation (%): Fusing Roller (Heating Roller)
079	Rotation (%): Pressure Roller
	Displays the value given by the following formula: (Current printouts Target printouts) 100. This shows how much of the unit’s expected lifetime has been used up. The Page% counter is based on printouts, not revolutions. If the number of printouts reaches the limit, the machine enters the end condition for that unit. If the revolution count lifetime is reached first, the machine also enters the end condition, even though the Page% counter is still less than 100%.
091	Page (%): K PCU (Drum Unit)			*ENG			[0 to 255 / - / 1 %/step]
092	Page (%): M PCU (Drum Unit)
093	Page (%): C PCU (Drum Unit)
094	Page (%): Y PCU (Drum Unit)
095	Page (%): K Dev Unit
096	Page (%): M Dev Unit
097	Page (%): C Dev Unit
098	Page (%): Y Dev Unit
099	Page (%): K Developer			*ENG			[0 to 255 / - / 1 %/step]
100	Page (%): M Developer
101	Page (%): C Developer
102	Page (%): Y Developer
103	Page (%): ITB Unit
104	Page (%): Cleaning Unit
105	Page (%): Fusing Unit
106	Page (%): PTR Unit
107	Page (%): Fusing Roller (Heating Roller)
108	Page (%): Pressure Roller

7804	[PM Counter Reset] PM Counter Clear (Unit, [Color])
	Clears the PM counter. Press the Enter key after the machine asks “Execute?”, which will store the PM counter value in SP7-906 (PM Counter - Previous) and reset the value of the current PM counter (SP7-803) to “0”.
002	PCU (Drum Unit): Bk	-	-
003	PCU (Drum Unit): M	-	-
004	PCU (Drum Unit): C	-	-
005	PCU (Drum Unit): Y	-	-
006	PCU (Drum Unit): All	-	-
007	Development Unit: Bk	-	-
008	Development Unit: M	-	-
009	Development Unit: C	-	-
010	Development Unit: Y	-	-
011	Development Unit: All	-	-
012	Developer: Bk	-	-
013	Developer: M	-	-
014	Developer: C	-	-
015	Developer: Y	-	-
016	Developer: All	-	-
017	ITB Unit	-	-
018	Cleaning Unit	-	-
019	Fusing Unit	-	-
020	PTR Unit	-	-
021	Toner Collection Bottle	-	-
023	Fusing Roller(Heating Roller)	-	-
024	Pressure Roller	-	-
100	All	-	-

7807	[SC/Jam Counter Reset]
	Clears the counters related to SC codes and paper jams.
001	SC/Jam Clear	-	-

7832	[Self-Diagnose Result Display]
	Displays the result of the diagnostics.
001	Diag. Result	*CTL	-

7835	[ACC Counter]
001	Copy ACC	*CTL	Displays the ACC exectuion times for each mode.
002	Printer ACC	*CTL	Displays the ACC exectuion times for each mode.

7836	Total Memory Size
	Displays the memory capacity of the controller system.

7852	[DF Scan Glass Dust Check Counter]
7852	Counts the number of occurrences (0 to 65,535) when dust was detected on the scanning glass of the ADF or resets the dust detection counter. Counting is done only if SP4-020-1 (ADF Scan Glass Dust Check) is switched on.
001	Dust Detection Counter	*CTL	[0 to 9999 / - / 1 /step]
002	Dust Detection Clear Counter	*CTL	[0 to 9999 / - / 1 /step]

7853	[Replacement Counter]
7853	Displays the PM parts replacement number.
001	K Drum Unit	*CTL	[0 to 255 / - / 1 /step]
002	M Drum Unit	*CTL
003	C Drum Unit	*CTL
004	Y Drum Unit	*CTL
005	K Dev Unit	*CTL
006	M Dev Unit	*CTL
007	C Dev Unit	*CTL
008	Y Dev Unit	*CTL
009	K Developer	*CTL
010	M Developer	*CTL
011	C Developer	*CTL
012	Y Developer	*CTL
013	ITB Unit	*CTL	[0 to 255 / - / 1 /step]
014	Belt Cleaning Unit	*CTL
015	Fusing Unit	*CTL
016	PTR Unit	*CTL
017	Toner Collection Bottle	*CTL
018	Fusing Roller(Heating Roller)	*CTL
019	Pressure Roller	*CTL

7855	[Coverage Range]
7855	Sets the color coverage threshold. Coverage rate = Coverage per page / A4 full coverage (dots) x 100 There are three coverage counters: Color 1, Color 2, and Color 3 [A] 5% (default) is adjustable with SP7855-001. [B] 20% (default) is adjustable with SP7855-002. The setting value [B] must be set larger than [A]. The total numbers of printouts (BW printing plus color printing) for each coverage range are displayed with the following SPs. Color1 counter: SP8601-021 Color2 counter: SP8601-022 Color3 counter: SP8601-023
001	Coverage Range 1	*CTL	[1 to 200 / 5 /1]
002	Coverage Range 2	*CTL	[1 to 200 / 20 /1]

7906	[Prev. Unit PM Counter]
	(Page or Rotations, Unit, [Color]), Dev.: Development Unit
	Displays the number of sheets printed with the previous maintenance units.
001	Page: K Drum Unit	*ENG		[0 to 9999999 / 0 / 1 page/step ]
002	Page: M Drum Unit
003	Page: C Drum Unit
004	Page: Y Drum Unit
005	Page: K Dev Unit
006	Page: M Dev Unit
007	Page: C Dev Unit
008	Page: Y Dev Unit
009	Page: K Developer
010	Page: M Developer
011	Page: C Developer
012	Page: Y Developer
013	Page: ITB Unit	*ENG		[0 to 9999999 / 0 / 1 page/step ]
014	Page: Cleaning Unit
015	Page: Fusing Unit
016	Page: PTR Unit
017	Page: Toner Collection Bottle
018	Fusing Roller (Heating Roller)
019	Pressure Roller
	Displays the number of revolutions for motors or clutches in the previous maintenance units.
031	Rotation: K Drum Unit	*ENG		[0 to 9999999 / 0 / 1 mm/step ]
032	Rotation: M Drum Unit
033	Rotation: C Drum Unit
034	Rotation: Y Drum Unit
035	Rotation: K Dev Unit
036	Rotation: M Dev Unit
037	Rotation: C Dev Unit
038	Rotation: Y Dev Unit
039	Rotation: K Developer
040	Rotation: M Developer
041	Rotation: C Developer
042	Rotation: Y Developer
043	Rotation: ITB Unit	*ENG		[0 to 9999999 / 0 / 1 mm/step ]
044	Rotation: Cleaning Unit
045	Rotation: Fusing Unit
046	Rotation: PTR Unit
047	Measurement: Toner Collection bottle
048	Rotation: Fusing Roller (Heating Roller)
049	Rotation: Pressure Roller
	Displays the number of sheets printed with the previous maintenance unit or toner cartridge.
061	Rotation (%): K Drum Unit	*ENG		[0 to 255 / 0 / 1 %/step ]
062	Rotation (%): M Drum Unit
063	Rotation (%): C Drum Unit
064	Rotation (%): Y Drum Unit
065	Rotation (%): K Dev Unit
066	Rotation (%): M Dev Unit
067	Rotation (%): C Dev Unit
068	Rotation (%): Y Dev Unit
069	Rotation (%): K Developer	*ENG		[0 to 255 / 0 / 1 %/step ]
070	Rotation (%): M Developer
071	Rotation (%): C Developer
072	Rotation (%): Y Developer
073	Rotation (%): ITB Unit
074	Rotation (%): Cleaning Unit
075	Rotation (%): Fusing Unit
076	Rotation (%): PTR Unit
077	Measurement (%): Toner Collection bottle
078	Rotation: Fusing Roller (Heating Roller)
079	Rotation: Pressure Roller
	Displays the value given by the following formula: (Current count Yield count) x 100, where “Current count” is the current values in the counter for the part, and “Yield count” is the recommended yield.
091	Page (%): K Drum Unit		*ENG		[0 to 255 / 0 / 1 %/step ]
092	Page (%): M Drum Unit
093	Page (%): C Drum Unit
094	Page (%): Y Drum Unit
095	Page (%): K Dev Unit
096	Page (%): M Dev Unit
097	Page (%): C Dev Unit
098	Page (%): Y Dev Unit
099	Page (%): K Developer
100	Page (%): M Developer
101	Page (%): C Developer
102	Page (%): Y Developer
103	Page (%): ITB Unit		*ENG		[0 to 255 / 0 / 1 %/step ]
104	Page (%): Cleaning Unit
105	Page (%): Fusing Unit
106	Page (%): PTR Unit
107	Page (%): Fusing Roller (Heating Roller)
108	Page (%): Pressure Roller

7931	[Toner Bottle Bk]
7931	Displays the toner bottle information for Bk.
001	Machine Serial ID	*ENG
002	Cartridge Ver
003	Brand ID
004	Area ID
005	Product ID
006	Color ID
007	Maintenance ID
008	New Product Information
009	Recycle Counter
010	Date
011	Serial No.
012	Toner Remaining
013	EDP Code
014	End History
015	Refill Information
016	Attachment: Total Counter
017	Attachment: Color Counter
018	End: Total Counter
019	End: Color Counter
020	Attachment Date
021	End Date

7932	[Toner Bottle M]
7932	Displays the toner bottle information for M.
001	Machine Serial ID	*ENG	-
002	Cartridge Ver
003	Brand ID
004	Area ID
005	Product ID
006	Color ID
007	Maintenance ID
008	New Product Information
009	Recycle Counter
010	Date
011	Serial No.
012	Toner Remaining	*ENG	-
013	EDP Code
014	End History
015	Refill Information
016	Attachment: Total Counter
017	Attachment: Color Counter
018	End: Total Counter
019	End: Color Counter
020	Attachment Date
021	End Date

7933	[Toner Bottle C]
7933	Displays the toner bottle information for C.
001	Machine Serial ID	*ENG	-
002	Cartridge Ver
003	Brand ID
004	Area ID
005	Product ID
006	Color ID
007	Maintenance ID
008	New Product Information
009	Recycle Counter
010	Date
011	Serial No.
012	Toner Remaining	*ENG	-
013	EDP Code
014	End History
015	Refill Information
016	Attachment: Total Counter
017	Attachment: Color Counter
018	End: Total Counter
019	End: Color Counter
020	Attachment Date
021	End Date

7934	[Toner Bottle Y]
7934	Displays the toner bottle information for Y.
001	Machine Serial ID	*ENG	-
002	Cartridge Ver
003	Brand ID
004	Area ID
005	Product ID
006	Color ID
007	Maintenance ID
008	New Product Information
009	Recycle Counter
010	Date
011	Serial No.
012	Toner Remaining	*ENG	-
013	EDP Code
014	End History
015	Refill Information
016	Attachment: Total Counter
017	Attachment: Color Counter
018	End: Total Counter
019	End: Color Counter
020	Attachment Date
021	End Date

7935	[Toner Bottle Log 1: Bk]
001	Serial No.	*ENG	Displays the toner bottle information log 1 for Bk.
002	Attachment Date
003	Attachment: Total Counter
004	Refill Information
011	Serial No.	*ENG	Displays the toner bottle information log 2 for Bk.
012	Attachment Date
013	Attachment: Total Counter
014	Refill Information
021	Serial No.	*ENG	Displays the toner bottle information log 3 for Bk.
022	Attachment Date
023	Attachment: Total Counter
024	Refill Information
031	Serial No.	*ENG	Displays the toner bottle information log 4 for Bk.
032	Attachment Date
033	Attachment: Total Counter
034	Refill Information
041	Serial No.	*ENG	Displays the toner bottle information log 5 for Bk.
042	Attachment Date
043	Attachment: Total Counter
044	Refill Information

7936	[Toner Bottle Log 1: M]
001	Serial No.	*ENG	Displays the toner bottle information log 1 for M.
002	Attachment Date
003	Attachment: Total Counter
004	Refill Information
011	Serial No.	*ENG	Displays the toner bottle information log 2 for M.
012	Attachment Date
013	Attachment: Total Counter
014	Refill Information
021	Serial No.	*ENG	Displays the toner bottle information log 3 for M.
022	Attachment Date
023	Attachment: Total Counter
024	Refill Information
031	Serial No.	*ENG	Displays the toner bottle information log 4 for M.
032	Attachment Date
033	Attachment: Total Counter
034	Refill Information
041	Serial No.	*ENG	Displays the toner bottle information log 5 for M.
042	Attachment Date
043	Attachment: Total Counter
044	Refill Information

7937	[Toner Bottle Log 1: C]
001	Serial No.	*ENG	Displays the toner bottle information log 1 for C.
002	Attachment Date
003	Attachment: Total Counter
004	Refill Information
011	Serial No.	*ENG	Displays the toner bottle information log 2 for C.
012	Attachment Date
013	Attachment: Total Counter
014	Refill Information
021	Serial No.	*ENG	Displays the toner bottle information log 3 for C.
022	Attachment Date
023	Attachment: Total Counter
024	Refill Information
031	Serial No.	*ENG	Displays the toner bottle information log 4 for C.
032	Attachment Date
033	Attachment: Total Counter
034	Refill Information
041	Serial No.	*ENG	Displays the toner bottle information log 5 for C.
042	Attachment Date
043	Attachment: Total Counter
044	Refill Information

7938	[Toner Bottle Log 1: Y]
001	Serial No.	*ENG	Displays the toner bottle information log 1 for Y.
002	Attachment Date
003	Attachment: Total Counter
004	Refill Information
011	Serial No.	*ENG	Displays the toner bottle information log 2 for Y.
012	Attachment Date
013	Attachment: Total Counter
014	Refill Information
021	Serial No.	*ENG	Displays the toner bottle information log 3 for Y.
022	Attachment Date
023	Attachment: Total Counter
024	Refill Information
031	Serial No.	*ENG	Displays the toner bottle information log 4 for Y.
032	Attachment Date
033	Attachment: Total Counter
034	Refill Information
041	Serial No.	*ENG	Displays the toner bottle information log 5 for Y.
042	Attachment Date
043	Attachment: Total Counter
044	Refill Information

7950	[Unit Replacement Date]
7950	Displays the replacement date of each PM unit.
001	Image Transfer Belt	*ENG	-
002	Cleaning Unit
003	Paper Transfer Unit
004	Fusing Unit
005	Toner Collection Bottle
006	K PCU (Drum Unit)
007	M PCU (Drum Unit)
008	C PCU (Drum Unit)
009	Y PCU (Drum Unit)
010	Fusing Roller (Heating Roller)
011	Pressure Roller

7951	[Remaining Day Counter]
7951	Displays the remaining unit life of each PM unit.
001	Page: K Drum Unit	*ENG	[0 to 255 / 255 / 1 day/step]
002	Page: M Drum Unit
003	Page: C Drum Unit
004	Page: Y Drum Unit
005	Page: K Dev Unit
006	Page: M Dev Unit
007	Page: C Dev Unit
008	Page: Y Dev Unit
009	Page: K Developer
010	Page: M Developer
011	Page: C Developer
012	Page: Y Developer
013	Page: ITB Unit	*ENG	[0 to 255 / 255 / 1 day/step]
014	Page: Cleaning Unit
015	Page: Fusing Unit
016	Page: PTR Unit
017	Page: Fusing Roller (Heating Roller)
018	Page: Pressure Roller
031	Rotation: K Drum Unit	*ENG	[0 to 255 / 255 / 1 day/step]
032	Rotation: M Drum Unit
033	Rotation: C Drum Unit
034	Rotation: Y Drum Unit
035	Rotation: K Dev Unit
036	Rotation: M Dev Unit
037	Rotation: C Dev Unit
038	Rotation: Y Dev Unit
039	Rotation: K Developer
040	Rotation: M Developer
041	Rotation: C Developer
042	Rotation: Y Developer
043	Rotation: ITB Unit	*ENG	[0 to 255 / 255 / 1 day/step]
044	Rotation: Cleaning Unit
045	Rotation: Fusing Unit
046	Rotation: PTR Unit
047	Measurement: Toner Collection bottle
048	Rotation: Fusing Roller (Heating Roller)
049	Rotation: Pressure Roller

7952	[PM Yield Setting]
7952	Adjusts the unit yield of each PM unit.
001	Rotation: ITB Unit	*CTL	[0 to 999999999 / 256597000 / 1 mm/step]
002	Rotation: Cleaning Unit	*CTL	[0 to 999999999 / 128299000 / 1 mm/step]
003	Rotation: Fusing Unit	*CTL	[0 to 999999999 / 155595000 / 1 mm/step]
004	Rotation: Paper Transfer Unit	*CTL	[0 to 999999999 / 192448000/ 1 mm/step]
011	Page: ITB Unit	*CTL	[0 to 999999 / 320000 / 1 sheet/step]
012	Page: Cleaning Unit	*CTL	[0 to 999999 / 160000 / 1 sheet/step]
013	Page: Fusing Unit	*CTL	[0 to 999999 / 160000 / 1 sheet/step]
014	Page: Paper Transfer Unit	*CTL	[0 to 999999 / 240000/ 1 sheet/step]
021	Day: K Drum Unit	*CTL	Adjusts the threshold day for the near end fro each PM unit. [1 to 30 / 15 / 1 day/step] These threshold days are used for @Remote alarms.
022	Day: M Drum Unit
023	Day: C Drum Unit
024	Day: Y Drum Unit
025	Day: K Dev Unit
026	Day: M Dev Unit
027	Day: C Dev Unit
028	Day: Y Dev Unit
029	Day: K Developer
030	Day: M Developer
031	Day: C Developer
032	Day: Y Developer
033	Day: ITB Unit	*CTL	Adjusts the threshold day for the near end fro each PM unit. [1 to 30 / 15 / 1 day/step] These threshold days are used for @Remote alarms.
034	Day:Cleaning Unit
035	Day: Fusing Unit
036	Day: PTR Unit
037	Day: Toner Collection Botte
038	Rotation: PCU (Drum Unit): Bk	*CTL	[0 to 999999999 / 0 / 1 mm/step]
039	Rotation: PCU (Drum Unit): M
040	Rotation: PCU (Drum Unit): C
041	Rotation: PCU (Drum Unit): Y
042	Rotation: Development Unit: Bk	*CTL	[0 to 999999999 / 0 / 1 mm/step]
043	Rotation: Development Unit: M
044	Rotation: Development Unit: C
045	Rotation: Development Unit: Y
046	Rotation: Developer: Bk	*CTL	[0 to 999999999 / 0 / 1 mm/step]
047	Rotation: Developer: M
048	Rotation: Developer: C
049	Rotation: Developer: Y
050	Page: PCU (Drum Unit): Bk	*CTL	[0 to 999999 / 0 / 1 sheet/step]
051	Page: PCU (Drum Unit): M
052	Page: PCU (Drum Unit): C
053	Page: PCU (Drum Unit): Y
054	Page: Development Unit: Bk	*CTL	[0 to 999999 / 0 / 1 sheet/step]
055	Page: Development Unit: M
056	Page: Development Unit: C
057	Page: Development Unit: Y
058	Page: Developer: Bk	*CTL	[0 to 999999 / 0 / 1 sheet/step]
059	Page: Developer: M
060	Page: Developer: C
061	Page: Developer: Y

7953	[Operation Env. Log: PCU: Bk]
	Displays the PCDU rotation distance in each specified operation environment. T: Temperature (C), H: Relative Humidity (%)
001	T<=0	*CTL	[0 to 99999999 / - / 1 mm/step]
002	0<T<=5:0<=H<30
003	0<T<=5: 30<=H<70
004	0<T<=5: 70<=H<=100
005	5<T<15: 0<=H<30
006	5<T<15: 30<=H<55
007	5<T<15: 55<=H<80
008	5<T<15: 80<=H<=100
009	15<=T<25: 0<=H<30
010	15<=T<25: 30<=H<55
011	15<=T<25: 55<=H<80	*CTL	[0 to 99999999 / - / 1 mm/step]
012	15<=T<25: 80<=H<=100
013	25<=T<30: 0<=H<30
014	25<=T<30: 55<=H<55
015	25<=T<30: 55<=H<80
016	25<=T<30: 80<=H<=100
017	30<=T: 0<=H<30
018	30<=T: 30<=H<55
019	30<=T: 55<=H<80
020	30<=T: 80<=H<=100

7954	[Operation Env. Log Clear]
	Clears the operation environment log.
001		-

7955	Fusing Stop
001	Near End: Page	-	[1 to 999999 / 318000 / 1 sheet/step]
	Displays the threshold sheet for the heating roller near end.
002	End: Page	-	[1 to 999999 / 330000 / 1 sheet/step]
	Displays the threshold sheet for the heating roller end.
003	Near End: Rotation	-	[0 to 999999999 / 999999999 / 1 mm/step]
	Displays the threshold distance for the heating roller near end.
004	End: Rotation	-	[0 to 999999999 / 999999999 / 1 mm/step]
	Displays the threshold distance for the heating roller end.