Top Page > Main Chapters > System Maintenance > Main SP Tables-8 > SP8-xxx: Data Log2

SP8-xxx: Data Log2

Many of these counters are provided for features that are currently not available, such as sending color faxes, and so on. However, here are some Group 8 codes that when used in combination with others, can provide useful information.

SP Numbers	What They Do
SP8211 to SP8216	The number of pages scanned to the document server.
SP8401 to SP8406	The number of pages printed from the document server
SP8691 to SP8696	The number of pages sent from the document server

Specifically, the following questions can be answered:

How is the document server actually being used?
What application is using the document server most frequently?
What data in the document server is being reused?

Most of the SPs in this group are prefixed with a letter that indicates the mode of operation (the mode of operation is referred to as an "application"). Before reading the Group 8 Service Table, make sure that you understand what these prefixes mean.

Prefixes	What it means
T:	Total: (Grand Total).	Grand total of the items counted for all applications (C, F, P, etc.).
C:	Copy application.	Totals (pages, jobs, etc.) executed for each application when the job was not stored on the document server.
F:	Fax application.
P:	Print application.
S:	Scan application.
L:	Local storage (document server)	Totals (jobs, pages, etc.) for the document server. The L: counters work differently case by case. Sometimes, they count jobs/pages stored on the document server; this can be in document server mode (from the document server window), or from another mode, such as from a printer driver or by pressing the Store File button in the Copy mode window. Sometimes, they include occasions when the user uses a file that is already on the document server. Each counter will be discussed case by case.
O:	Other applications (external network applications, for example)	Refers to network applications such as Web Image Monitor. Utilities developed with the SDK (Software Development Kit) will also be counted with this group in the future.

The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them on the small LCDs of printers and faxes that also use these SPs. Read over the list of abbreviations below and refer to it again if you see the name of an SP that you do not understand.

Key for Abbreviations

Abbreviation	What it means
/	"By", e.g. "T:Jobs/Apl" = Total Jobs "by" Application
>	More (2> "2 or more", 4> "4 or more"
AddBook	Address Book
Apl	Application
B/W	Black & White
Bk	Black
C	Cyan
ColCr	Color Create
ColMode	Color Mode
Comb	Combine
Comp	Compression
Deliv	Delivery
DesApl	Designated Application. The application (Copy, Fax, Scan, Print) used to store the job on the document server, for example.
Dev Counter	Development Count, no. of pages developed.
Dup, Duplex	Duplex, printing on both sides
Emul	Emulation
FC	Full Color
FIN	Post-print processing, i.e. finishing (punching, stapling, etc.)
Full Bleed	No Margins
GenCopy	Generation Copy Mode
GPC	Get Print Counter. For jobs 10 pages or less, this counter does not count up. For jobs larger than 10 pages, this counter counts up by the number that is in excess of 10 (e.g., for an 11-page job, the counter counts up 11-10 =1)
IFax	Internet Fax
ImgEdt	Image Edit performed on the original with the copier GUI, e.g. border removal, adding stamps, page numbers, etc.
K	Black (YMCK)
LS	Local Storage. Refers to the document server.
LSize	Large (paper) Size
Mag	Magnification
MC	One color (monochrome)
NRS	New Remote Service, which allows a service center to monitor machines remotely. "NRS" is used overseas, "CSS" is used in Japan.
Org	Original for scanning
OrgJam	Original Jam
Palm 2	Print Job Manager/Desk Top Editor: A pair of utilities that allows print jobs to be distributed evenly among the printers on the network, and allows files to moved around, combined, and converted to different formats.
PC	Personal Computer
PGS	Pages. A page is the total scanned surface of the original. Duplex pages count as two pages, and A3 simplex count as two pages if the A3/DLT counter SP is switched ON.
PJob	Print Jobs
Ppr	Paper
PrtJam	Printer (plotter) Jam
PrtPGS	Print Pages
R	Red (Toner Remaining). Applies to the wide format model A2 only. This machine is under development and currently not available.
Rez	Resolution
SC	Service Code (Error SC code displayed)
Scn	Scan
Sim, Simplex	Simplex, printing on 1 side.
S-to-Email	Scan-to-E-mail
SMC	SMC report printed with SP5990. All of the Group 8 counters are recorded in the SMC report.
Svr	Server
TonEnd	Toner End
TonSave	Toner Save
TXJob	Send, Transmission
YMC	Yellow, Magenta, Cyan
YMCK	Yellow, Magenta, Cyan, Black

All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear.

8 001	T:Total Jobs	*CTL	These SPs count the number of times each application is used to do a job. [0 to 9999999/ 0 / 1] Note: The L: counter is the total number of times the other applications are used to send a job to the document server, plus the number of times a file already on the document server is used.
8 002	C:Total Jobs	*CTL
8 003	F:Total Jobs	*CTL
8 004	P:Total Jobs	*CTL
8 005	S:Total Jobs	*CTL
8 006	L:Total Jobs	*CTL

These SPs reveal the number of times an application is used, not the number of pages processed.
When an application is opened for image input or output, this counts as one job.
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
Only jobs executed by the customer are counted. Jobs executed by the customer engineer using the SP modes are not counted.
When using secure printing (when a password is required to start the print job), the job is counted at the time when either "Delete Data" or "Specify Output" is specified.
A job is counted as a fax job when the job is stored for sending.
When a fax is received to fax memory, the F: counter increments but the L: counter does not (the document server is not used).
A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are not counted separately).
A fax broadcast is counted only after all the faxes have been sent to their destinations. If one transmission generates an error, then the broadcast will not be counted until the transmission has been completed.
A printed fax report counts as one job for the F: counter.
The F: counter does not distinguish between fax sending or receiving.
When a copy job on the document server is printed, SP8022 also increments, and when a print job stored on the document server is printed, SP8024 also increments.
When an original is both copied and stored on the document server, the C: and L: counters both increment.
When a print job is stored on the document server, only the L: counter increments.
When the user presses the Document Server button to store the job on the document server, only the L: counter increments.
When the user enters document server mode and prints data stored on the document server, only the L: counter increments.
When an image received from Palm 2 is received and stored, the L: counter increments.
When the customer prints a report (user code list, for example), the O: counter increments. However, for fax reports and reports executed from the fax application, the F: counter increments.

8 011	T:Jobs/LS	*CTL	These SPs count the number of jobs stored to the document server by each application, to reveal how local storage is being used for input. [0 to 9999999/ 0 / 1] The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel.
8 012	C:Jobs/LS	*CTL
8 013	F:Jobs/LS	*CTL
8 014	P:Jobs/LS	*CTL
8 015	S:Jobs/LS	*CTL
8 016	L:Jobs/LS	*CTL
8 017	O:Jobs/LS	*CTL

When a scan job is sent to the document server, the S: counter increments. When you enter document server mode and then scan an original, the L: counter increments.
When a print job is sent to the document server, the P: counter increments.
When a network application sends data to the document server, the O: counter increments.
When an image from Palm 2 is stored on the document server, the O: counter increments.
When a fax is sent to the document server, the F: counter increments.

8 021	T:Pjob/LS	*CTL	These SPs reveal how files printed from the document server were stored on the document server originally. [0 to 9999999/ 0 / 1] The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel.
8 022	C:Pjob/LS	*CTL
8 023	F:Pjob/LS	*CTL
8 024	P:Pjob/LS	*CTL
8 025	S:Pjob/LS	*CTL
8 026	L:Pjob/LS	*CTL
8 027	O:Pjob/LS	*CTL

When a copy job stored on the document server is printed with another application, the C: counter increments.
When an application like DeskTopBinder merges a copy job that was stored on the document server with a print job that was stored on the document server, the C: and P: counters both increment.
When a job already on the document server is printed with another application, the L: counter increments.
When a scanner job stored on the document server is printed with another application, the S: counter increments. If the original was scanned from within document server mode, then the L: counter increments.
When images stored on the document server by a network application (including Palm 2), are printed with another application, the O: counter increments.
When a copy job stored on the document server is printed with a network application (Web Image Monitor, for example), the C: counter increments.
When a fax on the document server is printed, the F: counter increments.

8 031	T:Pjob/DesApl	*CTL	These SPs reveal what applications were used to output documents from the document server. [0 to 9999999/ 0 / 1] The L: counter counts the number of jobs printed from within the document server mode screen at the operation panel.
8 032	C:Pjob/DesApl	*CTL
8 033	F:Pjob/DesApl	*CTL
8 034	P:Pjob/DesApl	*CTL
8 035	S:Pjob/DesApl	*CTL
8 036	L:Pjob/DesApl	*CTL
8 037	O:Pjob/DesApl	*CTL

When documents already stored on the document server are printed, the count for the application that started the print job is incremented.
When the print job is started from a network application (Desk Top Binder, Web Image Monitor, etc.) the L: counter increments.

8 041	T:TX Jobs/LS	*CTL	These SPs count the applications that stored files on the document server that were later accessed for transmission over the telephone line or over a network (attached to an e-mail, or as a fax image by I-Fax). [0 to 9999999/ 0 / 1] Note: Jobs merged for sending are counted separately. The L: counter counts the number of jobs scanned from within the document server mode screen at the operation panel.
8 042	C:TX Jobs/LS	*CTL
8 043	F:TX Jobs/LS	*CTL
8 044	P:TX Jobs/LS	*CTL
8 045	S:TX Jobs/LS	*CTL
8 046	L:TX Jobs/LS	*CTL
8 047	O:TX Jobs/LS	*CTL

When a stored copy job is sent from the document server, the C: counter increments.
When images stored on the document server by a network application or Palm2 are sent as an e-mail, the O: counter increments.

8 051	T:TX Jobs/DesApl	*CTL	These SPs count the applications used to send files from the document server over the telephone line or over a network (attached to an e-mail, or as a fax image by I-Fax). Jobs merged for sending are counted separately. [0 to 9999999/ 0 / 1] The L: counter counts the number of jobs sent from within the document server mode screen at the operation panel.
8 052	C:TX Jobs/DesApl	*CTL
8 053	F:TX Jobs/DesApl	*CTL
8 054	P:TX Jobs/DesApl	*CTL
8 055	S:TX Jobs/DesApl	*CTL
8 056	L:TX Jobs/DesApl	*CTL
8 057	O:TX Jobs/DesApl	*CTL

If the send is started from Desk Top Binder or Web Image Monitor, for example, then the O: counter increments.

8 061	T:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total the finishing methods. The finishing method is specified by the application.
8 062	C:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total finishing methods for copy jobs only. The finishing method is specified by the application.
8 063	F:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total finishing methods for fax jobs only. The finishing method is specified by the application. Note: Finishing features for fax jobs are not available at this time.
8 064	P:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total finishing methods for print jobs only. The finishing method is specified by the application.
8 065	S:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total finishing methods for scan jobs only. The finishing method is specified by the application. Note: Finishing features for scan jobs are not available at this time.
8 066	L:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total finishing methods for jobs output from within the document server mode screen at the operation panel. The finishing method is specified from the print window within document server mode.
8 067	O:FIN Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs total finishing methods for jobs executed by an external application, over the network. The finishing method is specified by the application.
8 06x 1	Sort	Number of jobs started in Sort mode. When a stored copy job is set for Sort and then stored on the document server, the L: counter increments. (See SP8 066 1)
8 06x 2	Stack	Number of jobs started out of Sort mode.
8 06x 3	Staple	Number of jobs started in Staple mode.
8 06x 4	Booklet	Number of jobs started in Booklet mode. If the machine is in staple mode, the Staple counter also increments.
8 06x 5	Z-Fold	Number of jobs started In any mode other than the Booklet mode and set for folding (Z-fold).
8 06x 6	Punch	Number of jobs started in Punch mode. When Punch is set for a print job, the P: counter increments. (See SP8 064 6.)
8 06x 7	Other	Reserved. Not used.

8 071	T:Jobs/PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of jobs broken down by the number of pages in the job, regardless of which application was used.
8 072	C:Jobs/PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count and calculate the number of copy jobs by size based on the number of pages in the job.
8 073	F:Jobs/PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count and calculate the number of fax jobs by size based on the number of pages in the job.
8 074	P:Jobs/PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count and calculate the number of print jobs by size based on the number of pages in the job.
8 075	S:Jobs/PGS			[0 to 9999999/ 0 / 1]
	These SPs count and calculate the number of scan jobs by size based on the number of pages in the job.
8 076	L:Jobs/PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count and calculate the number of jobs printed from within the document server mode window at the operation panel, by the number of pages in the job.
8 077	O:Jobs/PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count and calculate the number of "Other" application jobs (Web Image Monitor, Palm 2, etc.) by size based on the number of pages in the job.
8 07x 1	1 Page	8 07x 8			21 to 50 Pages
8 07x 2	2 Pages	8 07x 9			51 to 100 Pages
8 07x 3	3 Pages	8 07x 10			101 to 300 Pages
8 07x 4	4 Pages	8 07x 11			301 to 500 Pages
8 07x 5	5 Pages	8 07x 12			501 to 700 Pages
8 07x 6	6 to 10 Pages	8 07x 13			701 to 1000 Pages
8 07x 7	11 to 20 Pages	8 07x 14			1001 to Pages

For example: When a copy job stored on the document server is printed in document server mode, the appropriate L: counter (SP8076 0xx) increments.
Printing a fax report counts as a job and increments the F: counter (SP 8073).
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at the time the error occurs.
For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the number of pages of the copy job (SP 8072).
When printing the first page of a job from within the document server screen, the page is counted.

8 111	T:FAX TX Jobs	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) sent by fax, either directly or using a file stored on the document server, on a telephone line. Note: Color fax sending is not available at this time.
8 113	F: FAX TX Jobs	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) sent by fax directly on a telephone line. Note: Color fax sending is not available at this time.
8 11x 1	B/W
8 11x 2	Color

These counters count jobs, not pages.
This SP counts fax jobs sent over a telephone line with a fax application, including documents stored on the document server.
If the mode is changed during the job, the job will count with the mode set when the job started.
If the same document is faxed to both a public fax line and an I-Fax at a destination where both are available, then this counter increments, and the I-Fax counter (8 12x) also increments.
The fax job is counted when the job is scanned for sending, not when the job is sent.

8 121	T:IFAX TX Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) sent, either directly or using a file stored on the document server, as fax images using I-Fax. Note: Color fax sending is not available at this time.
8 123	F: IFAX TX Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of jobs (color or black-and-white) sent (not stored on the document server), as fax images using I-Fax. Note: Color fax sending is not available at this time.
8 12x 1		B/W
8 12x 2		Color

These counters count jobs, not pages.
The counters for color are provided for future use; the color fax feature is not available at this time.
The fax job is counted when the job is scanned for sending, not when the job is sent.

8 131	T:S-to-Email Jobs		*CTL		[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) scanned and attached to an e-mail, regardless of whether the document server was used or not.
8 135	S: S-to-Email Jobs		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of jobs (color or black-and-white) scanned and attached to e-mail, without storing the original on the document server.
8 13x 1		B/W
8 13x 2		Color
8 13x 3		ACS

These counters count jobs, not pages.
If the job is stored on the document server, after the job is stored it is determined to be color or black-and-white then counted.
If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be sent, the job is not counted.
If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.
If several jobs are combined for sending to the Scan Router, Scan-to-Email, or Scan-to-PC, or if one job is sent to more than one destination. each send is counted separately. For example, if the same document is sent by Scan-to-Email as well as Scan-to-PC, then it is counted twice (once for Scan-to-Email and once for Scan-to-PC).

8 141	T:Deliv Jobs/Svr	*CTL		[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) scanned and sent to a Scan Router server.
8 145	S: Deliv Jobs/Svr	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of jobs (color or black-and-white) scanned in scanner mode and sent to a Scan Router server.
8 14x 1	B/W
8 14x 2	Color
8 14x 3	ACS

These counters count jobs, not pages.
The jobs are counted even though the arrival and reception of the jobs at the Scan Router server cannot be confirmed.
If even one color image is mixed with black-and-white images, then the job is counted as a "Color" job.
If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be delivered, the job is not counted.
If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.
Even if several files are combined for sending, the transmission counts as one job.

8 151	T:Deliv Jobs/PC		*CTL		[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) scanned and sent to a folder on a PC (Scan-to-PC). Note: At the present time, 8 151 and 8 155 perform identical counts.
8 155	S:Deliv Jobs/PC		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of jobs (color or black-and-white) scanned and sent with Scan-to-PC.
8 15x 1		B/W
8 15x 2		Color
8 15x 3		ACS

These counters count jobs, not pages.
If the job is cancelled during scanning, it is not counted.
If the job is cancelled while it is waiting to be sent, the job is not counted.
If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.
Even if several files are combined for sending, the transmission counts as one job.

8 161

T:PCFAX TX Jobs

*CTL

These SPs count the number of PC Fax transmission jobs. A job is counted from when it is registered for sending, not when it is sent.

[0 to 9999999/ 0 / 1]

Note: At the present time, these counters perform identical counts.

8 163

F:PCFAX TX Jobs

*CTL

This counts fax jobs started from a PC using a PC fax application, and sending the data out to the destination from the PC through the copier.

8 171	T:Deliv Jobs/WSD	*CTL	These SPs count the pages scanned by WS. [0 to 9999999/ 0 / 1]
8 175	S:Deliv Jobs/WSD	*CTL
-001	B/W
-002	Color
-003	ACS

8 181	T:Scan to Media Jobs	*CTL	These SPs count the scanned pages in a media by the scanner application. [0 to 9999999/ 0 / 1]
8 185	S:Scan to Media Jobs	*CTL
-001	B/W
-002	Color
-003	ACS

8 191	T:Total Scan PGS	*CTL	These SPs count the pages scanned by each application that uses the scanner to scan images. [0 to 9999999/ 0 / 1]
8 192	C:Total Scan PGS	*CTL
8 193	F:Total Scan PGS	*CTL
8 195	S:Total Scan PGS	*CTL
8 196	L:Total Scan PGS	*CTL

SP 8 191 to 8 196 count the number of scanned sides of pages, not the number of physical pages.
These counters do not count reading user stamp data, or reading color charts to adjust color.
Previews done with a scanner driver are not counted.
A count is done only after all images of a job have been scanned.
Scans made in SP mode are not counted.

Examples

If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored, the S: count is 4.
If both sides of 3 A4 sheets are copied and stored to the document server using the Store File button in the Copy mode window, the C: count is 6 and the L: count is 6.
If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.
If you enter document server mode then scan 6 pages, the L: count is 6.

8 201	T:LSize Scan PGS	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of large pages input with the scanner for scan and copy jobs. Large size paper (A3/DLT) scanned for fax transmission are not counted. Note: These counters are displayed in the SMC Report, and in the User Tools display.
8 203	F: LSize Scan PGS	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of large pages input with the scanner for fax transmission. Note: These counters are displayed in the SMC Report, and in the User Tools display.
8 205	S:LSize Scan PGS	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of large pages input with the scanner for scan jobs only. Large size paper (A3/DLT) scanned for fax transmission are not counted. Note: These counters are displayed in the SMC Report, and in the User Tools display.

8 211	T:Scan PGS/LS	*CTL	These SPs count the number of pages scanned into the document server . [0 to 9999999/ 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
8 212	C:Scan PGS/LS	*CTL
8 213	F:Scan PGS/LS	*CTL
8 215	S:Scan PGS/LS	*CTL
8 216	L:Scan PGS/LS	*CTL

Reading user stamp data is not counted.
If a job is cancelled, the pages output as far as the cancellation are counted.
If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.
If pages are copied but not stored on the document server, these counters do not change.
If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the L: count is 6.
If you enter document server mode then scan 6 pages, the L: count is 6.

8 221	ADF Org Feeds		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages fed through the ADF for front and back side scanning.
8 221 1	Front	Number of front sides fed for scanning: With an ADF that can scan both sides simultaneously, the Front side count is the same as the number of pages fed for either simplex or duplex scanning. With an ADF that cannot scan both sides simultaneously, the Front side count is the same as the number of pages fed for duplex front side scanning. (The front side is determined by which side the user loads face up.)
8 221 2	Back	Number of rear sides fed for scanning: With an ADF that can scan both sides simultaneously, the Back count is the same as the number of pages fed for duplex scanning. With an ADF that cannot scan both sides simultaneously, the Back count is the same as the number of pages fed for duplex rear-side scanning.

When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the pages are not counted if the jam occurs before the first sheet is output.

8 231	Scan PGS/Mode	*CTL		[0 to 9999999/ 0 / 1]
	These SPs count the number of pages scanned by each ADF mode to determine the work load on the ADF.
8 231 1	Large Volume		Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
8 231 2	SADF		Selectable. Feeding pages one by one through the ADF.
8 231 3	Mixed Size		Selectable. Select "Mixed Sizes" on the operation panel.
8 231 4	Custom Size		Selectable. Originals of non-standard size.
8 231 5	Platen		Book mode. Raising the ADF and placing the original directly on the platen.
8 231 6	Mixed 1side/ 2side		Simplex and Duplex mode.

If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is done for the last selected mode.
The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's page sizes are mixed or non-standard, these are not counted.
If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is enabled.
In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with SADF, the Platen count is 1 and the SADF count is 3.

8 241	T:Scan PGS/Org			*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of scanned pages by original type for all jobs, regardless of which application was used.
8 242	C:Scan PGS/Org			*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages scanned by original type for Copy jobs.
8 243	F:Scan PGS/Org			*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages scanned by original type for Fax jobs.
8 245	S:Scan PGS/Org			*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages scanned by original type for Scan jobs.
8 246	L:Scan PGS/Org			*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages scanned and stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
		8 241	8 242			8 243	8 245	8 246
8 24x 1: Text		Yes	Yes			Yes	Yes	Yes
8 24x 2: Text/Photo		Yes	Yes			Yes	Yes	Yes
8 24x 3: Photo		Yes	Yes			Yes	Yes	Yes
8 24x 4: GenCopy, Pale		Yes	Yes			No	Yes	Yes
8 24x 5: Map		Yes	Yes			No	Yes	Yes
8 24x 6: Normal/Detail		Yes	No			Yes	No	No
8 24x 7: Fine/Super Fine		Yes	No			Yes	No	No
8 24x 8: Binary		Yes	No			No	Yes	No
8 24x 9: Grayscale		Yes	No			No	Yes	No
8 24x 10: Color		Yes	No			No	Yes	No
8 24x 11: Other		Yes	Yes			Yes	Yes	Yes

If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is done for the last selected mode.

8 251	T:Scan PGS/ImgEdt	*CTL	These SPs show how many times Image Edit features have been selected at the operation panel for each application. Some examples of these editing features are: Erase> Border Erase> Center Image Repeat Centering Positive/Negative [0 to 9999999/ 0 / 1] Note: The count totals the number of times the edit features have been used. A detailed breakdown of exactly which features have been used is not given.
8 252	C:Scan PGS/ImgEdt	*CTL
8 254	P:Scan PGS/ImgEdt	*CTL
8 255	S : Scan PGS/ImgEdr	*CTL
8 256	L:Scan PGS/ImgEdt	*CTL
8 257	O:Scan PGS/ImgEdt	*CTL

The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen.

8 261	T:Scan PGS/ColCr		*CTL	-
8 262	C:Scan PGS/ ColCr		*CTL	-
8 265	S:Scn PGS/Color		*CTL	-
8 266	L:Scn PGS/ColCr		*CTL	-
8 26x 1		Color Conversion	These SPs show how many times color creation features have been selected at the operation panel.
8 26x 2		Color Erase
8 26x 3		Background
8 26x 4		Other

8 281

T:Scan PGS/TWAIN

*CTL

These SPs count the number of pages scanned using a TWAIN driver. These counters reveal how the TWAIN driver is used for delivery functions.

[0 to 9999999/ 0 / 1]
Note: At the present time, these counters perform identical counts.

8 285

S:Scan PGS/TWAIN

*CTL

8 291

T:Scan PGS/Stamp

*CTL

These SPs count the number of pages stamped with the stamp in the ADF unit.

[0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen

8 293

F:Scan PGS/Stamp

*CTL

8 295

S:Scan PGS/Stamp

*CTL

8 301	T:Scan PGS/Size		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by size the total number of pages scanned by all applications. Use these totals to compare original page size (scanning) and output (printing) page size [SP 8-441].
8 302	C:Scan PGS/Size		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by size the total number of pages scanned by the Copy application. Use these totals to compare original page size (scanning) and output (printing) page size [SP 8-442].
8 303	F:Scan PGS/Size		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by size the total number of pages scanned by the Fax application. Use these totals to compare original page size (scanning) and output page size [SP 8-443].
8 305	S:Scan PGS/Size		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by size the total number of pages scanned by the Scan application. Use these totals to compare original page size (scanning) and output page size [SP 8-445].
8 306	L:Scan PGS/Size		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by size the total number of pages scanned and stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen. Use these totals to compare original page size (scanning) and output page size [SP 8-446].
8 30x 1	A3	-
8 30x 2	A4
8 30x 3	A5
8 30x 4	B4
8 30x 5	B5
8 30x 6	DLT
8 30x 7	LG
8 30x 8	LT
8 30x 9	HLT
8 30x 10	Full Bleed
8 30x 254	Other (Standard)
8 30x 255	Other (Custom)

8 311	T:Scan PGS/Rez	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by resolution setting the total number of pages scanned by applications that can specify resolution settings.
8 315	S: Scan PGS/Rez	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by resolution setting the total number of pages scanned by applications that can specify resolution settings. Note: At the present time, SP8-311 and SP8-315 perform identical counts.
8 31x 1	1200dpi <
8 31x 2	600dpi to 1199dpi
8 31x 3	400dpi to 599dpi
8 31x 4	200dpi to 399dpi
8 31x 5	< 199dpi

Copy resolution settings are fixed so they are not counted.
The Fax application does not allow finely-adjusted resolution settings so no count is done for the Fax application.

8 381	T:Total PrtPGS	*CTL	These SPs count the number of pages printed by the customer. The counter for the application used for storing the pages increments. [0 to 9999999/ 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel. Pages stored with the Store File button from within the Copy mode screen go to the C: counter.
8 382	C:Total PrtPGS	*CTL
8 383	F:Total PrtPGS	*CTL
8 384	P:Total PrtPGS	*CTL
8 385	S:Total PrtPGS	*CTL
8 386	L:Total PrtPGS	*CTL
8 387	O:Total PrtPGS	*CTL

When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted as 2.
When several documents are merged for a print job, the number of pages stored are counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the following pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.

8 391

LSize PrtPGS

*CTL

[0 to 9999999/ 0 / 1]

These SPs count pages printed on paper sizes A3/DLT and larger.

Note: In addition to being displayed in the SMC Report, these counters are also displayed in the User Tools display on the copy machine.

8 401	T:PrtPGS/LS	*CTL	These SPs count the number of pages printed from the document server. The counter for the application used to print the pages is incremented. The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel. [0 to 9999999/ 0 / 1]
8 402	C:PrtPGS/LS	*CTL
8 403	F:PrtPGS/LS	*CTL
8 404	P:PrtPGS/LS	*CTL
8 405	S:PrtPGS/LS	*CTL
8 406	L:PrtPGS/LS	*CTL

Print jobs done with Web Image Monitor and Desk Top Binder are added to the L: count.
Fax jobs done with Web Image Monitor and Desk Top Binder are added to the F: count.

8 411

Prints/Duplex

*CTL

This SP counts the amount of paper (front/back counted as 1 page) used for duplex printing. Last pages printed only on one side are not counted.

[0 to 9999999/ 0 / 1]

8 421	T:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing. This is the total for all applications.
8 422	C:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the copier application.
8 423	F:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the fax application.
8 424	P:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the printer application.
8 425	S:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the scanner application.
8 426	L:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing from within the document server mode window at the operation panel.
8 427	O:PrtPGS/Dup Comb		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by Other applications
8 42x 1	Simplex> Duplex
8 42x 2	Duplex> Duplex
8 42x 3	Book> Duplex
8 42x 4	Simplex Combine
8 42x 5	Duplex Combine
8 42x 6	2>	2 pages on 1 side (2-Up)
8 42x 7	4>	4 pages on 1 side (4-Up)
8 42x 8	6>	6 pages on 1 side (6-Up)
8 42x 9	8>	8 pages on 1 side (8-Up)
8 42x 10	9>	9 pages on 1 side (9-Up)
8 42x 11	16>	16 pages on 1 side (16-Up)
8 42x 12	Booklet
8 42x 13	Magazine

These counts (SP8 421 to SP8 427) are especially useful for customers who need to improve their compliance with ISO standards for the reduction of paper consumption.
Pages that are only partially printed with the n-Up functions are counted as 1 page.
Here is a summary of how the counters work for Booklet and Magazine modes:

Booklet		Magazine
Original Pages	Count	Original Pages	Count
1	1	1	1
2	2	2	2
3	2	3	2
4	2	4	2
5	3	5	4
6	4	6	4
7	4	7	4
8	4	8	4

8 431	T:PrtPGS/ImgEdt		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of pages output with the three features below, regardless of which application was used.
8 432	C:PrtPGS/ImgEdt		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of pages output with the three features below with the copy application.
8 434	P:PrtPGS/ImgEdt		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of pages output with the three features below with the print application.
8 436	L:PrtPGS/ImgEdt		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of pages output from within the document server mode window at the operation panel with the three features below.
8 437	O:PrtPGS/ImgEdt		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total number of pages output with the three features below with Other applications.
8 43x 1	Cover/Slip Sheet	Total number of covers or slip sheets inserted. The count for a cover printed on both sides counts 2.
8 43x 2	Series/Book	The number of pages printed in series (one side) or printed as a book with booklet right/left pagination.
8 43x 3	User Stamp	The number of pages printed where stamps were applied, including page numbering and date stamping.

8 441	T:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed by all applications.
8 442	C:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed by the copy application.
8 443	F:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed by the fax application.
8 444	P:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed by the printer application.
8 445	S:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed by the scanner application.
8 446	L:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed from within the document server mode window at the operation panel.
8 447	O:PrtPGS/Ppr Size	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by print paper size the number of pages printed by Other applications.
8 44x 1	A3
8 44x 2	A4
8 44x 3	A5
8 44x 4	B4
8 44x 5	B5
8 44x 6	DLT
8 44x 7	LG
8 44x 8	LT
8 44x 9	HLT
8 44x 10	Full Bleed
8 44x 254	Other (Standard)
8 44x 255	Other (Custom)

These counters do not distinguish between LEF and SEF.

8 451	PrtPGS/Ppr Tray		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of sheets fed from each paper feed station.
8 451 1	Bypass Tray	Bypass Tray
8 451 2	Tray 1	Copier
8 451 3	Tray 2	Copier
8 451 4	Tray 3	Paper Tray Unit (Option)
8 451 5	Tray 4	Paper Tray Unit (Option)
8 451 6	Tray 5	LCT (Option)
8 451 7	Tray 6	Currently not used.
8 451 8	Tray 7	Currently not used.
8 451 9	Tray 8	Currently not used.
8 451 10	Tray 9	Currently not used.

8 461	T:PrtPGS/Ppr Type	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by paper type the number pages printed by all applications. These counters are not the same as the PM counter. The PM counter is based on feed timing to accurately measure the service life of the feed rollers. However, these counts are based on output timing. Blank sheets (covers, chapter covers, slip sheets) are also counted. During duplex printing, pages printed on both sides count as 1, and a page printed on one side counts as 1.
8 462	C:PrtPGS/Ppr Type	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by paper type the number pages printed by the copy application.
8 463	F:PrtPGS/Ppr Type	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by paper type the number pages printed by the fax application.
8 464	P:PrtPGS/Ppr Type	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by paper type the number pages printed by the printer application.
8 466	L:PrtPGS/Ppr Type	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by paper type the number pages printed from within the document server mode window at the operation panel.
8 46x 1	Normal
8 46x 2	Recycled
8 46x 3	Special
8 46x 4	Thick
8 46x 5	Normal (Back)
8 46x 6	Thick (Back)
8 46x 7	OHP
8 46x 8	Other

8 471	PrtPGS/Mag	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by magnification rate the number of pages printed.
8 471 1	< 49%
8 471 2	50% to 99%
8 471 3	100%
8 471 4	101% to 200%
8 471 5	201% <

Counts are done for magnification adjusted for pages, not only on the operation panel but performed remotely with an external network application capable of performing magnification adjustment as well.
Magnification adjustments done with printer drivers with PC applications such as Excel are also counted.
Magnification adjustments done for adjustments after they have been stored on the document server are not counted.
Magnification adjustments performed automatically during Auto Reduce/Enlarge copying are counted.
The magnification rates of blank cover sheets, slip sheets, etc. are automatically assigned a rate of 100%.

8 481

T:PrtPGS/TonSave

*CTL

8 484

P:PrtPGS/TonSave

*CTL

These SPs count the number of pages printed with the Toner Save feature switched on.

Note: These SPs return the same results as this SP is limited to the Print application.

[0 to 9999999/ 0 / 1]

8 491	T:PrtPGS/Col Mode	*CTL	These SPs count the number of pages printed in the Color Mode by each application.
8 492	C:PrtPGS/Col Mode	*CTL
8 493	F:PrtPGS/Col Mode	*CTL
8 496	L:PrtPGS/Col Mode	*CTL
8 497	O:PrtPGS/Col Mode	*CTL
8 49x 1	B/W
8 49x 2	Single Color
8 49x 3	Two Color
8 49x 4	Full Color

8 501	T:PrtPGS/Col Mode	*CTL	These SPs count the number of pages printed in the Color Mode by the print application.
8 504	P:PrtPGS/Col Mode	*CTL
8 507	O:PrtPGS/Col Mode	*CTL
8 50x 1	B/W
8 50x 2	Mono Color
8 50x 3	Full Color
8 50x 4	Single Color
8 50x 5	Two Color

8 511	T:PrtPGS/Emul		*CTL	[0 to 9999999/ 0 / 1]
8 511	These SPs count by printer emulation mode the total number of pages printed.
8 514	P:PrtPGS/Emul		*CTL	[0 to 9999999/ 0 / 1]
8 514	These SPs count by printer emulation mode the total number of pages printed.
8 514 1	RPCS
8 514 2	RPDL
8 514 3	PS3
8 514 4	R98
8 514 5	R16
8 514 6	GL/GL2
8 514 7	R55
8 514 8	RTIFF
8 514 9	PDF
8 514 10	PCL5e/5c
8 514 11	PCL XL
8 514 12	IPDL-C
8 514 13	BM-Links	Japan Only
8 514 14	Other

SP8 511 and SP8 514 return the same results as they are both limited to the Print application.
Print jobs output to the document server are not counted.

8 521	T:PrtPGS/FIN	*CTL	[0 to 9999999 / 0 / 1]
	These SPs count by finishing mode the total number of pages printed by all applications.
8 522	C:PrtPGS/FIN	*CTL	[0 to 9999999 / 0 / 1]
	These SPs count by finishing mode the total number of pages printed by the Copy application.
8 523	F:PrtPGS/FIN	*CTL	[0 to 9999999 / 0 / 1]
	These SPs count by finishing mode the total number of pages printed by the Fax application. NOTE: Print finishing options for received faxes are currently not available.
8 524	P:PrtPGS/FIN	*CTL	[0 to 9999999 / 0 / 1]
	These SPs count by finishing mode the total number of pages printed by the Print application.
8 525	S:PrtPGS/FIN	*CTL	[0 to 9999999 / 0 / 1]
	These SPs count by finishing mode the total number of pages printed by the Scanner application.
8 526	L:PrtPGS/FIN	*CTL	[0 to 9999999 / 0 / 1]
	These SPs count by finishing mode the total number of pages printed from within the document server mode window at the operation panel.
8 52x 1	Sort
8 52x 2	Stack
8 52x 3	Staple
8 52x 4	Booklet
8 52x 5	Z-Fold
8 52x 6	Punch
8 52x 7	Other

If stapling is selected for finishing and the stack is too large for stapling, the unstapled pages are still counted.
The counts for staple finishing are based on output to the staple tray, so jam recoveries are counted.

8 531

Staples

*CTL

This SP counts the amount of staples used by the machine.

[0 to 9999999 / 0 / 1]

8 581	T:Counter		*CTL	[0 to 9999999 / 0 / 1]
	These SPs count the total output broken down by color output, regardless of the application used. In addition to being displayed in the SMC Report, these counters are also displayed in the User Tools display on the copy machine.
8 581 1		Total
8 581 2		Total: Full Color
8 581 3		B&W/Single Color
8 581 4		Development: CMY
8 581 5		Development: K
8 581 6		Copy: Color
8 581 7		Copy: B/W
8 581 8		Print: Color
8 581 9		Print: B/W
8 581 10		Total: Color
8 581 11		Total: B/W
8 581 12		Full Color: A3
8 581 13		Full Color: B4 JIS or Smaller
8 581 14		Full Color Print
8 581 15		Mono Color Print
8 581 16		Full Color GPC
8 581 17		Twin Colour Mode Print
8 581 18		Full Colour Print (Twin)
8 581 19		Mono Colour Print (Twin)
8 581 20		Full Colour Total (CV)
8 581 21		Mono Colour Total (CV)
8 581 22		Full Colour Print (CV)

8 582	C:Counter		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total output of the copy application broken down by color output.
8 582 1		B/W
8 582 2		Single Color
8 582 3		Two Color
8 582 4		Full Color

8 583	F:Counter		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total output of the fax application broken down by color output.
8 583 1		B/W
8 583 2		Single Color

8 584	P:Counter		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total output of the print application broken down by color output.
8 584 1		B/W
8 584 2		Mono Color
8 584 3		Full Color
8 584 4		Single Color
8 584 5		Two Color

8 586	L:Counter		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the total output of the local storage broken down by color output.
8 582 1		B/W
8 582 2		Single Color
8 582 3		Two Color
8 582 4		Full Color

8 591	O:Counter		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the totals for A3/DLT paper use, number of duplex pages printed, and the number of staples used. These totals are for Other (O:) applications only.
8 591 1	A3/DLT	-
8 591 2	Duplex

8 601	Coverage Counter	*CTL		[0 to 9999999/ 0 / 1]
	These SPs count the total coverage for each color and the total printout pages for each printing mode.
8 601 1	B/W		-
8 601 2	Color
8 601 11	B/W Printing Pages
8 601 12	Color Printing Pages
8 601 21	Coverage Counter 1
8 601 22	Coverage Counter 2
8 601 23	Coverage Counter 3

8 617	SDK Apli Counter		*CTL	[0 to 9999999/ 0 / 1]
8 617	These SPs count the total printout pages for each SDK applicaion.
8 617 1	SDK-1	-
8 617 2	SDK-2
8 617 3	SDK-3
8 617 4	SDK-4
8 617 5	SDK-5
8 617 6	SDK-6

8 631	T:FAX TX PGS	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the number of pages sent by fax to a telephone number.
8 633	F:FAX TX PGS	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the number of pages sent by fax to a telephone number.
8 63x 1	B/W
8 63x 2	Color

If a document has color and black-and-white pages mixed, the pages are counted separately as B/W or Color.
At the present time, this feature is provided for the Fax application only so SP8631 and SP8633 are the same.
The counts include error pages.
If a document is sent to more than one destination with a Group transmission, the count is done for each destination.
Polling transmissions are counted but polling RX are not.
Relay, memory, and confidential mailbox transmissions and are counted for each destination.

8 641	T:IFAX TX PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the number of pages sent by fax to as fax images using I-Fax.
8 643	F:IFAX TX PGS		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the number of pages sent by Fax as fax images using I-Fax.
8 64x 1		B/W
8 64x 2		Color

If a document has color and black-and-white pages mixed, the pages are counted separately as B/W or Color.
At the present time, this feature is provided for the Fax application only so SP8641 and SP8643 are the same.
The counts include error pages.
If a document is sent to more than one destination with a Group transmission, the count is done for each destination.
Polling transmissions are counted but polling RX are not.
Relay, memory, and confidential mailbox transmissions and are counted for each destination.

8 651		T:S-to-Email PGS	*CTL	[0 to 9999999/ 0 / 1]
		These SPs count by color mode the total number of pages attached to an e-mail for both the Scan and document server applications.
8 655		S:S-to-Email PGS	*CTL	[0 to 9999999/ 0 / 1]
		These SPs count by color mode the total number of pages attached to an e-mail for the Scan application only.
8 65x 1	B/W
8 65x 2	Color

The count for B/W and Color pages is done after the document is stored on the HDD. If the job is cancelled before it is stored, the pages are not counted.
If Scan-to-Email is used to send a 10-page document to 5 addresses, the count is 10 (the pages are sent to the same SMTP server together).
If Scan-to-PC is used to send a 10-page document to 5 folders, the count is 50 (the document is sent to each destination of the SMB/FTP server).
Due to restrictions on some devices, if Scan-to-Email is used to send a 10-page document to a large number of destinations, the count may be divided and counted separately. For example, if a 10-page document is sent to 200 addresses, the count is 10 for the first 100 destinations and the count is also 10 for the second 100 destinations, for a total of 20.).

8 661	T:Deliv PGS/Svr		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the total number of pages sent to a Scan Router server by both Scan and LS applications.
8 665	S:Deliv PGS/Svr		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the total number of pages sent to a Scan Router server by the Scan application.
8 66x 1		B/W
8 66x 2		Color

The B/W and Color counts are done after the document is stored on the HDD of the Scan Router server.
If the job is canceled before storage on the Scan Router server finishes, the counts are not done.
The count is executed even if regardless of confirmation of the arrival at the Scan Router server.

8 671	T:Deliv PGS/PC		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the total number of pages sent to a folder on a PC (Scan-to-PC) with the Scan and LS applications.
8 675	S: Deliv PGS/PC		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count by color mode the total number of pages sent with Scan-to-PC with the Scan application.
8 67x 1		B/W
8 67x 2		Color

8 681

T:PCFAX TXPGS

*CTL

These SPs count the number of pages sent by PC Fax. These SPs are provided for the Fax application only, so the counts for SP8 681 and SP8 683 are the same.

[0 to 9999999/ 0 / 1]

8 683

F:PCFAX TXPGS

*CTL

This counts pages sent from a PC using a PC fax application, from the PC through the copier to the destination.
When sending the same message to more than one place using broadcasting, the pages are only counted once. (For example, a 10-page fax is sent to location A and location B. The counter goes up by 10, not 20.)

8 691	T:TX PGS/LS	*CTL	These SPs count the number of pages sent from the document server. The counter for the application that was used to store the pages is incremented. [0 to 9999999/ 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel. Pages stored with the Store File button from within the Copy mode screen go to the C: counter.
8 692	C:TX PGS/LS	*CTL
8 693	F:TX PGS/LS	*CTL
8 694	P:TX PGS/LS	*CTL
8 695	S:TX PGS/LS	*CTL
8 696	L:TX PGS/LS	*CTL

Print jobs done with Web Image Monitor and Desk Top Binder are added to the count.
If several documents are merged for sending, the number of pages stored are counted for the application that stored them.
When several documents are sent by a Fax broadcast, the F: count is done for the number of pages sent to each destination.

8 701	TX PGS/Port	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages sent by the physical port used to send them. For example, if a 3-page original is sent to 4 destinations via ISDN G4, the count for ISDN (G3, G4) is 12.
8 701 1	PSTN-1
8 701 2	PSTN-2
8 701 3	PSTN-3
8 701 4	ISDN (G3,G4)
8 701 5	Network

8 711	T:Scan PGS/Comp	*CTL	[0 to 9999999/ 0 / 1]
8 715	S:Scan PGS/Comp	*CTL	[0 to 9999999/ 0 / 1]
8 715	These SPs count the number of pages sent by each compression mode.
8 715 1	JPEG/JPEG2000
8 715 2	TIFF(Multi/Single)
8 715 3	PDF
8 715 4	Other
8 715 5	PDF/Comp

8 721	T:Deliv PGS/WSD	*CTL	[0 to 9999999/ 0 / 1]
8 725	S: Dvliv PGS/WSD	*CTL
	These SPs count the number of pages scanned by each scanner mode.
x 1	B/W	-
x 2	Color	-

8 731	T:Scan PGS/Media	*CTL	[0 to 9999999/ 0 / 1]
8 735	S:Scan PGS/Media	*CTL
	These SPs count the number of pages scanned and saved in a meia by each scanner mode.
x 1	B/W	-
x 2	Color	-

8 741	RX PGS/Port	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the number of pages received by the physical port used to receive them.
8 741 1	PSTN-1	-
8 741 2	PSTN-2	-
8 741 3	PSTN-3	-
8 741 4	ISDN (G3,G4)	-
8 741 5	Network	-

8 771	Dev Counter	*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the frequency of use (number of rotations of the development rollers) for black and other color toners.
8 771 1	Total
8 771 2	K
8 771 3	Y
8 771 4	M
8 771 5	C

8 781	Toner_Bottle_Info.			*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the number of already replaced toner bottles. NOTE: Currently, the data in SP7-833-011 through 014 and the data in SP8-781-001 through 004 are the same.
8 781 1		Toner: BK	The number of black-toner bottles
8 781 2		Toner: Y	The number of yellow-toner bottles
8 781 3		Toner: M	The number of magenta-toner bottles
8 781 4		Toner: C	The number of cyan-toner bottles

8 791

LS Memory Remain

*CTL

This SP displays the percent of space available on the document server for storing documents.

[0 to 100 / 0 / 1]

8 801	Toner Remain	*CTL	[0 to 100/ 0 / 1]
	These SPs display the percent of toner remaining for each color. This SP allows the user to check the toner supply at any time. Note: This precise method of measuring remaining toner supply (1% steps) is better than other machines in the market that can only measure in increments of 10 (10% steps).
8 801 1	K
8 801 2	Y
8 801 3	M
8 801 4	C

8 851	CVr Cnt: 0-10%	*ENG	[0 to 9999999/ 0 / 1]
8 851	These SPs display the number of scanned sheets on which the coverage of each color is from 0% to 10%.
8 851 11	0 to 2%: BK	8 851 31		5 to 7%: BK
8 851 12	0 to 2%: Y	8 851 32		5 to 7%: Y
8 851 13	0 to 2%: M	8 851 33		5 to 7%: M
8 851 14	0 to 2%: C	8 851 34		5 to 7%: C
8 851 21	3 to 4%: BK	8 851 41		8 to 10%: BK
8 851 22	3 to 4%: Y	8 851 42		8 to 10%: Y
8 851 23	3 to 4%: M	8 851 43		8 to 10%: M
8 851 24	3 to 4%: C	8 851 44		8 to 10%: C

8 861	CVr Cnt: 11-20%	*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the number of scanned sheets on which the coverage of each color is from 11% to 20%.
8 861 1	BK
8 861 2	Y
8 861 3	M
8 861 4	C

8 871	CVr Cnt: 21-30%	*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the number of scanned sheets on which the coverage of each color is from 21% to 30%.
8 871 1	BK
8 871 2	Y
8 871 3	M
8 871 4	C

8 881	CVr Cnt: 31%-	*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the number of scanned sheets on which the coverage of each color is 31% or higher.
8 881 1	BK
8 881 2	Y
8 881 3	M
8 881 4	C

8 891	Page/Toner Bottle	*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the amount of the remaining current toner for each color.
8 891 1	BK
8 891 2	Y
8 891 3	M
8 891 4	C

8 901	Page/Toner_prev1	*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the amount of the remaining previous toner for each color.
8 901 1	BK
8 901 2	Y
8 901 3	M
8 901 4	C

8 911	Page/Toner_prev2	*ENG	[0 to 9999999/ 0 / 1]
	These SPs display the amount of the remaining 2nd previous toner for each color.
8 911 1	BK
8 911 2	Y
8 911 3	M
8 911 4	C

8 921	Cvr Cnt/Total	*CTL	[0 to 9999999/ 0 / 1]
8 921	Displays the total coverage and total printout number for each color.
8 921 1	Coverage (%) Bk
8 921 2	Coverage (%) Y
8 921 3	Coverage (%) M
8 921 4	Coverage (%) C
8 921 11	Coverage /P: Bk
8 921 12	Coverage /P: Y
8 921 13	Coverage /P: M
8 921 14	Coverage /P: C

8 941	Machine Status		*CTL	[0 to 9999999/ 0 / 1]
	These SPs count the amount of time the machine spends in each operation mode. These SPs are useful for customers who need to investigate machine operation for improvement in their compliance with ISO Standards.
8 941 1	Operation Time	Engine operation time. Does not include time while controller is saving data to HDD (while engine is not operating).
8 941 2	Standby Time	Engine not operating. Includes time while controller saves data to HDD. Does not include time spent in Energy Save, Low Power, or Off modes.
8 941 3	Energy Save Time	Includes time while the machine is performing background printing.
8 941 4	Low Power Time	Includes time in Energy Save mode with Engine on. Includes time while machine is performing background printing.
8 941 5	Off Mode Time	Includes time while machine is performing background printing. Does not include time machine remains powered off with the power switches.
8 941 6	SC	Total time when SC errors have been staying.
8 941 7	PrtJam	Total time when paper jams have been staying during printing.
8 941 8	OrgJam	Total time when original jams have been staying during scanning.
8 941 9	Supply PM Unit End	Total time when toner end has been staying

8 951	AddBook Register		*CTL
	These SPs count the number of events when the machine manages data registration.
8 951 1	User Code/User ID	User code registrations.		[0 to 9999999/ 0 / 1]
8 951 2	Mail Address	Mail address registrations.
8 951 3	Fax Destination	Fax destination registrations.
8 951 4	Group	Group destination registrations.
8 951 5	Transfer Request	Fax relay destination registrations for relay TX.
8 951 6	F-Code	F-Code box registrations.
8 951 7	Copy Program	Copy application registrations with the Program (job settings) feature.		[0 to 255 / 0 / 255]
8 951 8	Fax Program	Fax application registrations with the Program (job settings) feature.
8 951 9	Printer Program	Printer application registrations with the Program (job settings) feature.
8 951 10	Scanner Program	Scanner application registrations with the Program (job settings) feature.

8 999	Admin. Counter List	*CTL	[0 to 9999999/ 0 / 1]
	Displays the total coverage and total printout number for each color.
8 999 1	Total
8 999 2	Copy: Full Color
8 999 3	Copy: BW
8 999 4	Copy: Single Color
8 999 5	Copy: Two Color
8 999 6	Printer Full Color
8 999 7	Printer BW
8 999 8	Printer Single Color
8 999 9	Printer Two Color
8 999 10	Fax Print: BW
8 999 12	A3/DLT
8 999 13	Duplex
8 999 14	Coverage: Color (%)
8 999 15	Coverage: BW (%)
8 999 16	Coverage: Color Print Page (%)
8 999 17	Coverage: BW Print Page (%)
8 999 101	Transmission Total: Color
8 999 102	Transmission Total: BW
8 999 103	FAX Transmission
8 999 104	Scanner Transmission: Color
8 999 105	Scanner Transmission: BW