No. |
Result |
Description |
Possible Causes/Action |
---|---|---|---|
1 |
Successfully completed |
Developer initialization is successfully completed. |
- |
2 |
Forced termination |
Developer initialization was forcibly terminated. |
|
6 |
Vt error |
Vt is more than 0.7V when Vcnt is 4.3V. |
|
7 |
Vcnt error 1 |
Vcnt is less than 4.7V when Vcnt is Vt target ±0.2V. |
|
8 |
Vcnt error 2 |
Vt is more than 0.7V when Vcnt is 4.3V and Vcnt is less than 4.7V when Vcnt is Vt target ±0.2V. |
|
9 |
Vcnt error 3 |
Vcnt is less than 4.7V. |
|
The machine starts developer initialization after you set “Enable” in SP3-902-005, 006, 007, or 008. Developer initialization automatically resumes when you open and close the front door or turn the main switch off and on if an error other than Error 8 occurs.