Testing the SD Card/USB Slot

1. Insert an SD card or USB memory device in the slot.

   You can connect only one removable memory device at a time.

2. Close the media slot cover.

   If you leave the cover open, static electricity conducted through an inserted SD card could cause the machine to malfunction.

3. Make sure that no previous settings remain.

   If a previous setting remains, press the [Clear Modes] key.

4. Place an original on the exposure glass.

5. Press [Store File].

6. Press [Store to Memory Device].

7. Press [OK].

8. Press the [Start] key.

   When writing is complete, a confirmation message appears.

9. Press [Exit].

10. Remove the memory device from the media slot.

    Do not remove the memory device while writing is in process.