Unplug the main machine power cord before you do the following procedure.
Remove the slot B cover [A] ( x 2).
Install the file format converter [B] into slot B and then fasten it with screws.
Plug in and turn on the main power switch.
Check or set the following SP codes with the values shown below.
SP No. |
Title |
Setting |
---|---|---|
SP5-836-001 |
Capture Function (0:Off 1:On) |
"1" |
SP5-836-002 |
Panel Setting |
"0" |
Check the operation.
Make sure that the machine can recognize the option (see ‘Check All Connections’ at the end of this section).