Skip header
 

Top Page > Main Chapters > Installation > Controller Options > IPDS Unit Type C5501

IPDS Unit Type C5501

CAUTION

  • Unplug the main machine power cord before you do the following procedure.

d546i104.png

  1. Remove the SD-card slot cover [A] from the SD card slots (_screw.png x 1).

  2. Move the SD card (security applications) [B] from slot 1 to slot 2.

    • If the VM card is already in slot 2, first remove the VM card in SD slot 2.

  3. Insert the SD card [C] (IPDS Unit) in SD slot 1 with its label face towards the front of the machine.

  4. Plug in, and then turn on the machine.

  5. Move security applications from the SD card in SD slot 2 to the SD card in SD slot 1 with SP5-873-001.

  6. Turn off the machine.

  7. Remove the SD card from SD slot 2, and then keep it in a safe place (_point.png SD Card Appli Move).

  8. Insert the VM card in SD slot 2.

  9. Attach the SD-card slot cover, and then turn on the machine (_screw.png x 1).