ARDF sub-scan magnification
Put the temporary test chart on the ARDF. Then make a copy from one of the feed stations.
Check the magnification ratio. Adjust with SP6-017-001 if necessary.
Standard: ±5.0%
Reduction mode: ±1.0%
Enlargement mode: ±1.0%
Put the temporary test chart on the ARDF. Then make a copy from one of the feed stations.
Check the magnification ratio. Adjust with SP6-017-001 if necessary.
Standard: ±5.0%
Reduction mode: ±1.0%
Enlargement mode: ±1.0%
