Skip header
 

Top Page > Main Chapters > Replacement and Adjustment > Image Creation > Toner Collection Bottle

Toner Collection Bottle

If you will install a new bottle, and the old bottle is not in a full or near-full condition, then set SP 3902-017 to 1.

Note

  • If you do this, then the machine will reset the PM counter for the bottle automatically, after you turn the power on again.

  • If the bottle is in a full or near-full condition, it is not necessary to do this.

  1. Turn off the main power switch.

    d027r176.png

  2. Open the front door and remove the screw [A].

  3. Close the front door.

  4. Pull out tray 1 [B].

  5. Open the toner collection bottle door [C].

  6. Pull out the toner collection bottle [D].