Test

1. Do SP2-111-003 (Mode c: rough adjustment).

2. Use SP2-194-007 to check if the result of the line position adjustment is correct (0: Completed successfully, 1: Not completed). If the result is "1", refer to ‘Countermeasure list for color registration errors’.

3. Do SP2-111-001 (Mode a: fine adjustment twice).

4. Use SP2-194-007 to check if the result of the line position adjustment is correct (0: Completed successfully, 1: Not completed). If the result is "1", refer to ‘Countermeasure list for color registration errors’.

5. Put some A3/DLT paper on the by-pass tray.

   

   • When you print a test pattern, use the by-pass tray to feed the paper.

6. Print out test pattern "7" with SP2-109-003.

7. Check the printed output with a loupe.

8. If there are no color registration errors on the output, the line position adjustment is correctly done. If not, refer to the countermeasure list for color registration errors.