| Condition | Resolution |
|---|---|
| Execute Filling Liquid Extraction 1 (SP2-012-002) cannot be executed. | Make sure that ink cartridges with the ink replacement jigs are set and the lock lever fully rises. |
| Executing "7" in SP2-012-002 is failed. | Make sure that the lock lever of ink cartridges rises. |
| Execute Ink Filling (SP2-012-003) cannot be executed. | Check the all eight ink cartridges are set. |
| Executing "7" in SP2-012-003 is failed. | Make sure that ink cartridges are inserted correctly and the lock lever of ink cartridges rises. |
| Execute Air Purge (Operating) (SP2-012-005) cannot be executed. | Make sure that the port cover opens, and then retry Execute Air Purge (Flag Rewriting) (SP2-012-004). |
| Executing "1 or 2 or 4" in SP2-012-005 is failed. | Make sure that ink cartridges are inserted correctly. Make sure that the lock lever of ink cartridges rises. Make sure that the port cover opens. |
| Fully Automated Cleaning (SP2-100-003) cannot be executed. | Make sure that the content of waste ink bottle is 0 %. |
| Proceeding sequence has stopped. (For example, front cover open) | Do the procedure according to the proceed administration. If air purge needs to do, execute Execute Air Purge (Flag Rewriting) (SP2-012-004). |
| Waste ink bottle has become full. | Repeatedly sequence failure results in many waste ink counts. Adjust the waste ink quantity to the amount you check visually. |
| Missing nozzle cannot be solved. | Refer to "Requests for Daily Care and Maintenance", User Manual. |
| Run out of flushing liquid is displayed. | Make sure that the lock lever of ink cartridges rises. |
| An error occurs while discharging the filling liquid or filling the ink. | Make sure that the lock lever of ink cartridges rises. |