- Media feed adjustment (Auto/Manual)
(Auto adjustment: refer to Adjustment of Sub-scan Direction Feed Amount. Manual Adjustment: Refer to the operating instructions.) - Head gap adjustment (Auto/Manual), white ink adjustment (manual only)
(Auto adjustment: refer to Auto Gap Adjustment. Manual Adjustment: Refer to the operating instructions.) - In auto adjustment, detection error could occur when using the media with its surface being uneven, transparent, or colored.
To prevent detection error, use smooth media for auto adjustment (ex.PVC). If you cannot replace the media, select the manual adjustment. - Adjustment of feed amount correction as solution for banding. (Belt-like Uneven Density Appears)
- When performing feed adjustment immediately after re-winding the media, output the nozzle check pattern, and then perform the feed adjustment.
This is because the feed adjustment may be performed incorrectly at the point that media is once fed and returned, which results in poor printing quality. - When black streaks appears at the time that uneven density improves after performing the [Media Feed Adjustment] against uneven density, perform [Media Feed Correction]. (Performing the Connection Methods)