What You Need
| Parts | Q'ty | Note |
|---|---|---|
| Displacement liquid cartridge | 8 | |
| Ink replacement jigs | 8 | |
| Tubes | 4 | Only used in case of 4C+W -> 4C |
| Sealing materials for channel | 4 | Only used in case of 4C -> 4C+W |
Cleaning When Changing the Color
The Flow of Full Auto Cleaning
| No. | |
|---|---|
| 1 | Set 4C cartridges, a flushing cartridge, a cleaning cartridge, and then turn the power on. |
| 2 | Empty the waste ink bottle. |
| 3 | Set the waste ink count to 0. (SP7-962-012) |
| 4 | Press full auto cleaning. (SP2-100-003) To execute the SP, select "7" for all heads. |
| 5 | Remove the cartridge. |
| 6 | Set the jig used for discharging liquid, set the cartridge again, and then close the cartridge lock. |
| 7 | Discharge the filling liquid. (SP2-012-002) To execute the SP, select "7" for all heads. |
| 8 | Remove the jig used for discharging liquid. |
| 9 | Set the displacement liquid cartridge, and then close the cartridge lock. |
| 10 | Fill the liquid. (SP2-012-003) To execute the SP, select "7" for all heads. |
| 11 | Remove the cartridge. |
| 12 | Set the jig used for discharging liquid, set the cartridge again, and then close the cartridge lock. |
| 13 | Discharge liquid again. (SP2-012-002) To execute the SP, select "7" for all heads. |
| 14 | Remove the jig used for discharging liquid. |
| 15 | Set the displacement liquid cartridge, and then close the cartridge lock. |
| 16 | Fill the liquid again. (SP2-012-003) To execute the SP, select "7" for all heads. |
| 17 | Rewrite the air purge flag. (SP2-012-004) To execute the SP, select "7" for all heads. |
| 18 | Open the front cover, open the air purge port of H1, set the tray, and then close the front cover. |
| 19 | Perform air purge for H1. (SP2-012-005) To execute the SP, select "1" for head 1. |
| 20 | Open the front cover, close the air purge port of H1, remove the tray, and then close the front cover. |
| 21 | Perform head cleaning for H1. (SP2-010-001) To execute the SP, select "1" for head 1. |
| 22 | Open the front cover, open the air purge port of H2, set the tray, and then close the front cover. |
| 23 | Perform air purge for H2. (SP2-012-005) To execute the SP, select "2" for head 2. |
| 24 | Open the front cover, close the air purge port of H2, remove the tray, and then close the front cover. |
| 25 | Perform head cleaning for H2. (SP2-010-001) To execute the SP, select "2" for head 2. |
| 26 | Open the front cover, open the air purge port of H3, set the tray, and then close the front cover. |
| 27 | Perform air purge for H3. (SP2-012-005) To execute the SP, select "4" for head 3. |
| 28 | Open the front cover, close the air purge port of H3, remove the tray, and then close the front cover. |
| 29 | Perform head cleaning for H3. (SP2-010-001) To execute the SP, select "4" for head 3. |
When you cannot perform this procedure normally, refer to "Troubleshooting Information When Performing Initial Filling and Full Auto Cleaning".