1. Remove the cure heater. (Cure Heater)
  2. Move the media holding lever [A] to the inside of the main unit.
    When moving it, loosen the screw [B].
  3. Remove the brackets (left/right) [B] of the post guide plate and cutter unit [A].
    • Right side


    • Left side
  4. Disconnect the connectors.
  5. Remove the screws of the post guide plate and the cutter unit.

  6. Remove the hooks [A] in the middle of the post guide plate and cutter unit, and then remove the post guide plate and the cutter unit [B].

    When installing the post guide plate and cutter unit, make sure to hook the cutouts of the post guide plate and cutter unit onto the hooks of the main unit side.

  7. Remove the left cover [A] and the right cover [B] of the cutter unit.
  8. Separate the cutter unit [A] from the post guide plate [B].