When Low Temperature Mode is ON, the heaters enter low temperature mode after the machine does not print for a specified time. In low temperature mode, the pre-heater, print heater and the post heater is kept on at a lower temperature than during printing, which shortens the time required for starting a print job.
Low Temperature Mode can be specified in [Initial Setting] screen - [Time and Timer Settings] - [Cooling Mode]. Set the transition time (the time the machine waits after completing a print job before entering low temperature mode) and how many degrees the temperature is lowered from the target temperature.
Specify a shorter time than the sleep mode timer because the heaters turn off when the machine enters sleep mode.