After the main firmware update, it is necessary to rewrite the parameter in the following files.
The file for parameter update and the macro file are stored in the [Parameter] folder.
Before executing Macro, disconnect and connect the USB terminal, and then turn the power OFF/ON.
After firmware update, some PC execute self-reset. Self-reset may break the connection between PC and the USB. If the problem occurs, turn the power OFF/ON to reconnect the USB.
- Select [Control] - [Macro] on the menu bar, and then select the file “pdu_0.XX.ttl” in [Parameter] folder.
“PARAMETER IS UPDATED” is shown on the screen when the update is completed.
Screen Example: