1. Connect the USB hardware key (hardware key) to the USB port of the computer.
  2. Connect the USB flash drive to another USB port which differs from the USB port used by the hardware key.
    Autostart may appear asking what you would like to do with the files. Click the folder icon to continue.
  3. Open the USB flash drive through the explorer, and then double-click "Install_ONYX.exe".
  4. Click [Install].
  5. Check the agreement on the end user license contract (EULA), and click [Yes].
  6. Click [OK] to install the driver of the hardware key.
    Wait for a while.
    Depending on the environment of the computer you use, Microsoft Visual C++ 2015 Redistributable is installed.
  7. Select the folder you store.
    If you want to install the software into another hard drive, change only the first letter of the path. Do not change the name of the folder.
    Example: C:Onyx18 -> D:Onyx18
  8. Check used printer in the [Printers] area at the lower right part of the window.
  9. Click [Install] to start installation.
    Wait for a while.
    The web browser starts and the explanation of UAC and administrator authority is displayed, close the browser.
  10. After installation has been completed, click [Finish].
    RIP-Queue starts automatically.
  11. If registration wizard of myonyx appears and if you want to register, click [Next]. If you need not do, click [Cancel].
  12. Select [TCP/IP Printer] in [Configure Printer Port] window, and then click [Configure].
  13. Input the IP address of the printer or the host name in [IP address].
  14. Make sure that [Port Number:] is <Port52026>.
  15. Click [Test] for connection test.
    When the computer is normally connected to the printer, a dialog message [Valid IP Address Found] is displayed.
    If the connection test is failed, change the state of the operation panel so that a message [Ready] is displayed, and then retry the connection test.
  16. Click [OK] twice.
    Installation of RIPCenter/PosterShop is completed.