1. Remove the left front cover. (Removing the Left Front Cover)

  2. Open the right front cover [A].

    Lift the lock lever [A] tightly to let the shaft [C] fit the cutout section [B] of the bracket.

    Move the media holding lever [A] to inside of the main unit.

    When moving the media holding lever, loosen the screw [B].

  3. Remove the right side plate [A] and the left side plate [B].

  4. Remove the harnesses.

  5. Remove the screws from the cure heater.

  6. Remove the cure heater [A].
  7. Remove the bracket [A].
  8. Remove the guard [A].
  9. Remove the damper [A] and the holder [B] from the left side and right side of the cure heater.
  10. Wear gloves, and then remove the cure heaters [A].