1. Remove the rear right cover. (Removing the Rear Right Cover)
  2. Remove the carriage rising motor with the bracket. (Carriage Motor)
  3. Loosen the screws.

  4. Remove the fixing screws [A] from the right side plate.

    The screw [A] is different in size from other screws. When installing, make sure to use the correct screw [A].

  5. Remove the screws from the rear side.

  6. Inserting the driver into the hole [A] of the bracket, and then remove the screws [B].

    Receive the removed screw by hand [A] to prevent dropping it inside the main unit.

  7. Remove the screws of the bracket [A].
  8. Remove the screws loosened in step 3, and then remove the bracket [A] and carriage drive belt [B].

  9. Remove the carriage drive belt [A].

    When attaching the carriage drive belt, align the edge [A] of the carriage drive belt with the oblong hole [B] of the bracket.

    Before attaching the carriage drive belt, temporarily fix the carriage drive belt to the position [A].