1. Attach the right bottom cover [A] from the lower side, and then hook the cutouts onto the stepped screws [B].

    • Front side
    • Rear side

  2. Fix the right bottom cover [A]. (TAPPING SCREW - M4X8)

    • Front side
    • Rear side
  3. Connect the connector of the internal ventilation fan [A].

  4. Reattach the removed covers.
    If your customer uses the machine in the state of 4CW (C, M, Y, K, W), which is ink components type, reattach the right side lower cover, the rear right cover. (Do not reattach the right side upper cover)

    When installing the right side lower cover, use the stepped screw to retain the position [A].

    (SCREW:M3:DIA4X5.6)